Zebra ET40 ET45 IntelliSkin RAM-GDS-SKIN-ZE20C-NG
The Zebra ET40 ET45 IntelliSkin RAM-GDS-SKIN-ZE20C-NG is an IntelliSkin Next Gen protective sleeve designed specifically for Zebra ET40 and ET45 8-inch enterprise tablets. It combines a hard plastic shell with shock-absorbing rubber, ruggedized GDS docking contacts, scanner cutouts, and compatibility with the Expansion Back and PowerPack Battery. The sleeve also provides MIL-STD 810G drop-tested protection and connects the tablet to the GDS Ecosystem for charging and data synchronization.
What Is the RAM-GDS-SKIN-ZE20C-NG?
The RAM-GDS-SKIN-ZE20C-NG is an IntelliSkin Next Gen protective sleeve designed for the Zebra ET40 and ET45 8-inch enterprise tablets.
The sleeve uses an insert-molded design that combines a hard plastic shell with soft, shock-absorbing rubber. It also integrates ruggedized charging contacts on the bottom of the IntelliSkin for repetitive docking across the GDS Ecosystem.
Beyond basic protection, this model is designed around the features of the Zebra ET4x tablet series. Cutouts accommodate the device’s scanning functions, while additional space on the back supports compatible Zebra accessories such as the Expansion Back and PowerPack Battery.
Key Features of the Zebra ET40 ET45 IntelliSkin
Device-Specific Protective Design
The sleeve is designed specifically for the Zebra ET40 and ET45 8-inch enterprise tablet series.
Its construction combines a hard plastic shell with soft, shock-absorbing rubber. RAM Mounts also identifies the sleeve as MIL-STD 810G drop tested.
Ruggedized GDS Docking Contacts
Ruggedized charging contacts sit on the bottom of the IntelliSkin. They support repetitive docking and compatibility across the GDS Ecosystem.
The GDS connector and docking contacts provide charging and data synchronization capabilities for compatible GDS equipment. RAM Mounts specifies USB 3.1 as the maximum transfer capability supported by the IntelliSkin, although actual transfer speeds depend on the selected dock, charger, and device limitations.
Scanner Cutouts
The sleeve includes cutouts designed to accommodate the scanning functions of the Zebra ET40 and ET45.
This device-specific design helps maintain access to the tablet’s scanner functions while the IntelliSkin is installed.
Support for Zebra Accessories
The RAM-GDS-SKIN-ZE20C-NG provides additional cutouts and space on the back for compatible Zebra accessories.
RAM Mounts specifically identifies compatibility with the Expansion Back and PowerPack Battery.
GDS Shoulder Strap Connection Points
The IntelliSkin includes connector points at its corners that allow the GDS Shoulder Strap accessory to be attached.
This is another feature that distinguishes the ZE20C-NG from more general-purpose tablet sleeves.
Compatibility
The RAM-GDS-SKIN-ZE20C-NG is specifically compatible with:
- Zebra ET40 8″ Tablet
- Zebra ET45 8″ Tablet
RAM Mounts lists both devices under the official compatibility information for this IntelliSkin.
The sleeve is therefore intended for the ET40 and ET45 8-inch enterprise tablet series rather than being a general-purpose tablet case.
How the GDS Connection Works
The GDS connector is integrated into the IntelliSkin and uses ruggedized contacts positioned on the bottom of the sleeve.
When paired with compatible GDS docking equipment, these contacts provide the connection for charging and data synchronization. The design supports repetitive docking within the GDS Ecosystem.
The sleeve can therefore act as the device-side component in a compatible Zebra ET4x GDS setup.
External USB-C Connection
The RAM-GDS-SKIN-ZE20C-NG includes an external USB-C port.
According to the current RAM Mounts product information, the external USB-C port is for power only and does not allow data transfer. This distinction is important when evaluating the sleeve’s connection options.
For data synchronization through the GDS system, the relevant connection is the GDS docking interface rather than the external USB-C port.
GDS Dock Compatibility
The RAM-GDS-SKIN-ZE20C-NG is part of the GDS Ecosystem for Zebra ET40 and ET45 tablets.
RAM Mounts lists several compatible GDS docking solutions for this IntelliSkin, including powered vehicle docks and other docking configurations. The official Zebra ET4x GDS collection describes the system as consisting of the IntelliSkin, one or more GDS Docks, dock mounts, chargers and cables, and additional accessories.
For example, the GDS Powered Dock for Zebra ET4x 8″ is specifically listed for the ET40 and ET45 with IntelliSkin Next Gen and requires this IntelliSkin for compatibility.
MIL-STD 810G Protection
The sleeve provides MIL-STD 810G drop-tested protection.
RAM Mounts identifies this protection as part of the sleeve’s design for the Zebra ET40 and ET45 enterprise tablets.
The protective design combines the hard outer shell with soft, shock-absorbing rubber to form the IntelliSkin around the compatible tablet.
Technical Specifications
| Specification | Details |
| SKU | RAM-GDS-SKIN-ZE20C-NG |
| Product Type | IntelliSkin Next Gen protective sleeve |
| Compatible Devices | Zebra ET40 8″ Tablet; Zebra ET45 8″ Tablet |
| Materials | Polycarbonate and Thermoplastic Elastomers |
| Official Product Weight | 0.71 lb |
| Hardware Included | (4) Optional USB Type-C Caps |
| Packaging Type | Retail Box |
| D-Shape Contact Speed | Up to USB 3.1 @ 5Gbps |
| External USB-C | Power connection; data transfer not supported |
| Port | External USB-C 2.0 |
| Protection | MIL-STD 810G drop tested |
| Certifications | RoHS, WEEE, CE, UKCA |
| Warranty | 3 years |
These specifications are based on the current RAM Mounts product information.
What Makes This IntelliSkin Different?
The RAM-GDS-SKIN-ZE20C-NG is designed around the specific hardware and workflow requirements of Zebra ET40 and ET45 enterprise tablets.
Its distinguishing features include:
- Compatibility with Zebra ET40 and ET45 8-inch tablets.
- Scanner cutouts that accommodate the tablet’s scanning functions.
- Ruggedized GDS charging and docking contacts.
- Support for charging and data synchronization through the GDS connection.
- Compatibility with the Zebra Expansion Back and PowerPack Battery.
- Corner connector points for the GDS Shoulder Strap accessory.
- MIL-STD 810G drop-tested protection.
- Polycarbonate and thermoplastic elastomer construction.
- Compatibility with the GDS Ecosystem.
- Three-year warranty.
Frequently Asked Questions
RAM-GDS-SKIN-ZE20C-NG is an IntelliSkin Next Gen protective sleeve designed specifically for Zebra ET40 and ET45 8-inch enterprise tablets.
The sleeve is compatible with the Zebra ET40 8″ Tablet and Zebra ET45 8″ Tablet.
Yes. The GDS connector and docking contacts provide charging and data synchronization capabilities across the GDS Ecosystem.
No. RAM Mounts currently specifies that the external USB-C port is for power only and does not allow data transfer.
Yes. The IntelliSkin includes space and cutouts designed to accommodate these compatible Zebra accessories.
Yes. The IntelliSkin has cutouts designed to accommodate the scanning functions of the Zebra ET40 and ET45 tablets.
The RAM-GDS-SKIN-ZE20C-NG is backed by a 3-year warranty.
