RAP-B-378-AP11U RAM Mount 2.5" Adhesive Base w/ Apple iPhone 5, 5S Holder

The RAP-B-378-AP11U is a 2.5 inch diameter adhesive disk base, plastic arm and composite cradle designed to fit the following devices:

NOTE: Click here for more detailed information on the RAM-HOL-AP11U. Please call 224-578-9162 or complete the product inquiry form by clicking here.

RAP-B-378-AP11U shown above.

RAP-B-378-AP11U Includes the Following:

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Included Base: RAP-B-378U 2.5 inch adhesive disk base with 1 inch diameter rubber ball. Put the base practically anywhere you want to keep your handheld device easy to see and always within your reach. Designed with a very small foot print, finding a home on your dash or console is easy.
Included Arm: RAP-B-201U composite arm measures approximately 3.0 inches between socket center to socket center and is 3.6875 inches in total length. A tightening knob on the side of the arm enables the sockets to clamp firmly to a RAM 1 inch diameter ball. When loosening the side knob, you can pivot the ball and socket connections or completely disconnect the ball from the socket.
Holder/Cradle: RAM-HOL-AP11U high strength plastic holder for the Apple iPhone 5. Place the top of the Apple iPhone into the cradle, and then push the base into the expandable arms at the bottom of the holder. The arms will then snap into place when the iPhone is completely secured in the cradle. The cradle allows all cables (not included) to stay connected while the iPhone unit is in the cradle. Hardware to attach the holder/cradle to the RAP-B-238U is included.

Alternative Mounts that fit the iPhone 5 WITH or WITHOUT a Case or Sleeve:
Click here, to view X-Grip cradle for the Apple iPhone 5, 5S
Click here, to view Top Clamping cradle for Apple iPhone 5, 5S
Click here, to view Finger Gripping holder for Apple iPhone 5, 5S
Click here, to view AQUA-BOX Pro Water Resistant Case for the iPhone 5, 5S

themountdepot.com