Home > Tripod Workstations > Tripod Accessories >

  Universal COMPOSITE Clamp Base (Fits Rail/Edge Lip from 0.625" to 1.25") with Standard Sized Arm and RAM-HOL-BC1U Holder for Hand Held Devices and 2 Way Radios



 
Price $33.40


STOCK STATUS:In Stock

AVAILABILITY: Ships within 24 Hours
Product Code: RAP-B-121-BC1U
Qty:

DESCRIPTION
 
The RAP-B-121-BC1U is a composite clamp base mount assembly that will accommodate a rail or edge lip from 5/8 inch to 1.25 inches (commonly used in aviation applications). The assembly includes a standard sized length arm, diamond shaped adapter plate and holder for hand held devices and two way radios.

NOTE: If you have questions, please call 224-578-9162 or complete the product inquiry form by clicking here.


RAP-B-121-BC1U shown above. 

RAP-B-121-BC1U Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Color/Material: Black high strength composite.
  • Socket Ball Size: B-Ball Size = 1.0 inch Ball. Maximum suggested weight 2 lbs. 
  • Clamp Base Description: RAP-B-121BU composite clamp base mount accommodates a rail or edge lip from 5/8 inch to a maximum of 1.25 inches. The 1 inch rubber ball sits at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. To mount the base, simply place the clamps around the rail or edge and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes and unusual shaped motorbike rails. The rail does not need to be perfectly round to use this base.
  • Arm Description: RAP-B-201U composite standard sized length arm for 1 inch balls. The arm measures 2.875 inches between socket centers (3.6875 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction. 
  • Adapter Description: RAP-B-238U composite universal diamond plate with two holes measuring 1.9 inches from hole center to hole center and accommodates the AMPS hole pattern.
  • Cradle/Holders: RAM-HOL-BC1U black high strength composite holder radio cradle. The Ram Mount universal belt clip is designed to hold any hand held device or carry case with a belt clip. The holder was originally designed to hold hand held radios with a built in belt clip, but will also hold the belt clip used on cell phone and MP3 players.
    • The holder has a 1 1/8 inch long x 1/16 inch wide bar across the top with slightly raised support edges to stop the connected device from sliding off the holder.
  • Second Mounting Ball: Optional. Add the RAP-B-121BBU creating a double ball base. This 1 inch diameter ball allows a second mounting point to add additional accessories. The mounting point is located on top of the RAP-B-121BU base.
Manufacturer's Description: The RAM composite glareshield/yoke base is ideally suited for a day on the wing and yet easily removed for travel in the flight bag. Both strong and light weight, this new clamping base is perfect for numerous electronic devices commonly found in the cockpit. Modular in design, switch out the clamps for a perfect fit no matter what the mounting surface, or add a second ball to mount another device; brilliant. Crafted to hold firm to most glare shields, yokes, or tubing, practically any aircraft can benefit from this product. Simple to use and exceptionally versatile, RAM has created another “must have” for any pilot. Once you’ve had a chance to use this great little device, we’re confident you’ll find uses for it no matter what you fly, drive, or ride. With everything you get in this package, you may even find yourself using your new RAM Mount on a golf cart, work bench, or even exercise equipment. With RAM, there are no limits.

The composite glareshield/yoke mount will fit a rail or edge lip from 5/8" to a maximum of 1 1/4". The mounting base can also accept a second ball RAP-B-121BBU giving you the ultimate double ball base. To mount the base, simply place the clamp ends around the rail and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes, golf buggies or unusual shaped motorbike rails.

Accessories for this product...
RAP-B-121BBU RAM-HOL-PD3U RAM-HOL-UN3U
Price $8.85
Add
Price $12.95
Add
Price $19.60
Add


Browse for more products in the same category as this item:

Tripod Workstations > Tripod Accessories
Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Yoke Mount Assemblies (Fits .5" to 2.58" Rail Diameter) > Composite C Clamp RAP-B-121 Series Assemblies (Fits Rail/Edge Lip from 0.625" to 1.25") > Universal (iPhone, Smartphone, Netbook, Tablet, etc.) Assemblies


Single 3.25" Dia. Base with Twist Lock, Plastic Dual Pivot Arm and RAM-HOL-PD3U Universal Top Clamping Cradle (Fits Device Width 2.25" to 3.5" Including Most Smartphones with Cover/Case iPhone, Droid, etc.) $42.15
Single 3.25" Dia. Base with Twist Lock, Plastic Dual Pivot Arm (No Adapter) $22.25
Composite Diamond Base Plate with Standard Sized Arm and Diamond Shape Mounting Plate $16.35
Universal PLASTIC Diamond Plate with 1 Inch Ball $4.95
Triple 3.25" Dia. Suction Cup Base with Twist Lock, Standard Sized Length Arm and 75mm VESA Plate (Heavy Duty) $77.30
Single 2.7" Dia. Suction Cup Base with Twist Lock, PLASTIC Arm and Diamond Adapter Plate (Light Duty) $15.05
RAM ROD 2007 Holder with Square Base for Boats $20.15
Triple Base Adapter $9.35
Easy Mount Quick Release Male Adapter for RAM-B-238U $3.60