RAM-HOL-GA14U Garmin GPSMAP: 76C, 76CS, 76Cx and 76CSx and GPSMAP 96 and 96C

VEHICLE LAPTOP MOUNTS

Product Request

TMD can order any RAM product. Click here to email a price request or question.

Home > GPS Mounts and Cradles > GPS Cradles/Holders > Garmin >

Garmin RAM-HOL-GA14U Holder for Selected GPSMAP 76(C,CS,CSX) and 96(C) Series

Our Price: $9.95

Stock Status: In Stock

Availability: Usually Ships in 24 Hours
Product Code: RAM-HOL-GA14U

Description

The RAM-HOL-GA14U holder is designed to hold the following GPS units:

� Garmin GPSMAP 76C
� Garmin GPSMAP 76CS
� Garmin GPSMAP 76Cx
� Garmin GPSMAP 76CSx
� Garmin GPSMAP 96
� Garmin GPSMAP 96C

NOTE: As the manufacturer adds new units/models to the above series this cradle may fit additional models not listed above. Please call 224-578-9162 or complete the product inquiry form by clicking here.

NOTE: The Garmin GPS 72, GPS 76, GPSMAP 76 and GPSMAP 76S WILL NOT FIT this holder. These units require the RAM-HOL-GA6U holder.

Securing your GPS into the holder: Place the top of the GPS into the holder, and then push the base into the expandable arms at the bottom of the holder. The arms will then snap into place when the GPS is completely secured in the holder. The holder allows all cables to stay connected while the GPS unit is in the RAM holder.

RAM-HOL-GA14U cradle shown above.

RAM-HOL-GA14U Features and Options:

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty
Cradle Description: Black high strength composite holder. Place the top of the electronic device into the cradle, and then push the base into the expandable arms at the bottom of the holder. The arms will then snap into place when the electronic device is completely secured in the cradle. The cradle allows all cables (not included) to stay connected while the electronic device is in the cradle.
Cradle Hardware: Includes a set of nuts and bolts to connect to a RAM Mounts cradle adapter not included (see below).
Cradle Adapter: Optional. For 1.0 inch B-Ball size (RAM-B-xxxx) mounting applications this cradle will connect to either the RAM-B-238U (most popular) or RAM-B-202U. For 1.5 inch C-Ball size (RAM-xxxx) mounting applications this cradle will connect to either the RAM-238U or RAM-202U.

Optional RAM-B-238U shown above. Optional RAM-B-202U shown above.

Cradle Options (See Additional Product Information Below):

Complete Mounting System Options Listed Below:

Aviation Mounts

To see all aviation mounting solutions click here.
Example aviation mounts shown above. RAM-B-177U(left) and RAM-B-121-238U(right).

Flat Surface/Drill Down Mounts

To see all flat surface/drill down mounting solutions click here.

Example flat surface/drill down mounting solutions shown above. RAM-B-138U-C(left), RAM-B-138U(middle) and RAM-B-138U-A(right).

Motorcycle and Rail Mounts

To see complete motorcycle and rail mounting solutions click here.
To build your own custom motorcycle or rail base solution click here.

Example motorcycle and rail mounting solutions shown above. RAM-B-149ZU (left), RAM-B-174U(middle) and RAM-B-149CHU(right).

Suction Cup and Cup Holder Mounting Solutions

To see all suction cup mounting solutions click here.
To see all cup holder mounting solutions click here.
Example suction cup and cup holder mounting solutions shown above. RAM-B-166U(left) and RAP-299-2U(right).

Optional WATERPROOF AQUA BOX holder shown above. Consider a Waterproof Aqua Box for foul weather conditions. The RAM Mounts cradle/holder (i.e. RAM-HOL-xxxx) is not required if a waterproof aqua box is used.

Optional RAM-MAG-1U screen magnifier shown above for any RAM Mounts cradle/holder (RAM-HOL-xxxx) used with the RAM-B-238U or RAM-238U. Screen magnifier measures 2
inches x 4 inches with a 2x zoom.

Optional RAP-326 quick release adapter shown above includes RAP-326FU female and RAP-326MU male adapters. The quick release allows the electronic device to stay attached in the cradle while quickly being disconnected from the RAM-B-238U/RAM-238U and then re-attached to another mounting application using a RAM-B-238U/RAM-238U (i.e. motorcycle Garmin GPS device moved to automobile suction cup mount) without tools or disassembly! Requires RAP-326MU male adapter for the second application being attached to. The RAP-326FU mates to the RAP-326MU and the RAP-326MU mates to the RAM-B-238U/RAM-238U.

Optional RAM-KNOB-3LU keyed lock for RAM-B-201 series arms shown above. Replaces the twist knob on the arm with a keyed lock. Works great with directly mounted applications such as aqua boxes or when the adapter is directly secured to the electronic device.