Home > Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Waterproof Aqua Box Assemblies with Flex Lens >

Adhesive Flat Surface Mount with SMALL RAM-HOL-AQ7-1CU Aqua Box Pro 10 Waterproof Smartphone Holder
Adhesive Flat Surface Mount with SMALL RAM-HOL-AQ7-1CU Aqua Box Pro 10 Waterproof Smartphone Holder


 
Price $71.49

STOCK STATUS: In Stock - Ships Next Bus. Day

Product Code: RAP-B-378-AQ7-1
Qty:

DESCRIPTION
 
The RAP-B-378-AQ7-1 consists of 2.5" flex adhesive base, double socket arm, diamond adapter base and small Aqua Box Pro 10 case. Using the included PSA stick pad, put the flex adhesive mount practically anywhere you want to keep your handheld device easy to see and always within your reach. Designed with a very small foot print, finding a home on your scooter, motorcycle, kayak, boat or vehicle dash is easy. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
 
The high strength composite SMALL sized waterproof aqua box with soft touch flex lens that allows the controls of smartphone devices to remain operational (including capacitive, swiping screens).
 
The aqua box will accommodate electronic devices withing the following size range:
  • Width = Up to 2.46 inches
  • Height = Up to 4.58 inches
  • Depth = Up to .47 inches (Depth will stretch)

NOTE: The aqua box can be positioned either horizontally or vertically.

 
RAP-B-378-AQ7-1 aqua box shown above. Electronic device not included.
 
Note: This product is not recommended for underwater use. Depending on phone model and storage configuration, box may not float.
 
RAP-B-378-AQ7-1 Features:
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Included With Purchase:
  • Aqua Box Material: Black high strength composite.
  • Aqua Box Hole Pattern: The back of the aqua box has two pre-drilled holes compatible with the AMPS hole pattern (1.912 inches from center hole to center hole).
  • Aqua Box Features:
    • Mountable case. Perfect for use on ATV/UTV, Motorcycle, boat and more. Compatible with most RAM mounting systems.
    • A unique, patented all inclusive seal and Flex-Lens. This is really cool stuff!
    • Floating. A small storage pocket which is perfectly sized for a credit card, cash, key or small item provides buoyancy and storage.
    • Weather resistant/splash proof.
    • Unique design allows access to all side buttons on the phone while in case.
    • Replaceable PVC Vinyl screen offers a clear view of the screen, allowing easy operation of the touch screen while in the case.
    • Small, sleek form factor. Easy to pocket or carry along on your next adventure.
    • Text, listen to music, take photos/video, make/take calls all while protecting your phone.
    • Free standard belt clip with purchase.
    • Free safety lanyard with purchase.
    • Lifetime Warranty!
  • Aqua Box Manufacturer's Description: The RAM AQUA BOX product line has been keeping mobile phones and devices safe for years. Now, with the introduction of the AQUA BOX Pro, you have access to side buttons and full use of the touchscreen. Weather resistant and splash proof, this unique patented design allows access to all side buttons on the phone while in the case. Are you one of those people that can be a little rough on things? Our PVC Vinyl screen is replaceable so if you start to lose that crystal clear appearance, we’ve got you covered…literally. Allowing easy operation of the touch screen while in the case, the compact and sleek design means traveling with your AQUA BOX Pro is never a hassle. Think an enclosure will slow you down? Think again. Send text messages, listen to music, take photos or capture video, make calls all while protecting your phone.


Instructions
  • General recommendations to properly adhere the adhesive disc.
    1. Ensure that both the dashboard surface and the bottom of the Ram Mount base have been thoroughly cleaned and dried.
    2. Attach either side of adhesive to the base first, let it sit several hours to allow adhesive to thoroughly bond.
    3. Attach other side of adhesive (with base) to the dashboard surface.
    4. Let the adhesive disc sit several hours before adding socket arm components, etc. to allow the adhesive to properly bond to the dashboard surface.

ACCESSORIES FOR THIS PRODUCT...
2.5 Inch Adhesive Base with 1 Inch Diameter Ball COMPOSITE Universal 2.5 Inch Round Plate with 1 Inch Ball
Price $12.49

Add
Price: $7.49

Add
2.5 Inch Adhesive Base with 1 Inch Diameter Ball COMPOSITE Universal 2.5 Inch Round Plate with 1 Inch Ball


Browse for more products in the same category as this item:

Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Waterproof Aqua Box Assemblies with Flex Lens
AquaBox H20 Res. Mounts > Aqua Box Flat Surface Assemblies
AquaBox H20 Res. Mounts > Aqua Box Pro 10 - AQ7-1 for Small Smartphones (Fits Devices Up To: 4.58''H X 2.46''W X 0.47''D)
Adhesive Base Stick Mounts > RAP-B-378 (1 Inch Ball and Socket Arm) Assemblies with Cradle > Universal Assemblies
Adhesive Base Stick Mounts > RAP-B-378 (1 Inch Ball and Socket Arm) Assemblies with Cradle > Smartphone Assemblies