Home > Police Mounts >

Ford: Ford Police Interceptor Utility (2020-Newer) LAPTOP Mount System
Ford: Ford Police Interceptor Utility (2020-Newer) LAPTOP Mount System


 
Alternative Views:
Price $300.00

STOCK STATUS: In Stock - Ships Next Bus. Day


Product Code: RAM-VB-206-SW1
QTY:

DESCRIPTION
 
The RAM Universal No-Drill Laptop features a heavy-duty steel mounting base designed to fit the 2020-Newer Ford Police Interceptor Utility. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle. The included RAM Tough-Tray is spring loaded to accommodate 10" to 17" laptops.
Width Range: 10" - 16"
Side Arm Clamp Height: .5" - 1.75"
Tray Depth: 10"
Tray Thickness: 2.125"

The tray features four adjustable retaining arms with rubber grips. These arms can be moved both vertically and horizontally, enabling a custom fit for varying thicknesses of laptops and access to ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support phones or other electronics.
RAM-VB-206-SW1 laptop mount system for the following vehicles:
Ford Police Interceptor Utility(2020-Newer)
NOTE: As auto manufacturers redesign vehicle models this base may or may not fit additional models. If you do not see your vehicle listed contact us or complete the product inquiry form by clicking here.
NOTE: Click here for Airbag Safety and RAM Mounting Systems.

RAM-VB-206-SW1 Manufacturer Specifications:
NOTE: Manufacturer specifications can change without notice.
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Material: Black powder coated steel.
  • Seat Configuration: Bucket seats only. Call/email about bench seats.
  • Installation: No-drill installation. Attaches to existing seat studs.
  • Mount/Base Placement: Passenger side floor, in front of seat.
    • NOTE: Vehicle base will limit seat travel.
  • Vehicle Base Quick Disconnect: Optional. See RAM-VB-REM1 below.
  • Vehicle Base Dimensions:
    • Dimension A: 8.8 inches
    • Dimension B: 13.375 inches
    • Dimension C: 2inches
    • Center to Center Hole Seat Bolt Distance: 12.0 inches
    • NOTE: Center to Center Hole Seat Bolt Distance is the center hole distance of the two pre-drilled holes in the vehicle base that line up with the vehicle seat bolts. This distance MUST MATCH your vehicle.


Instructions
  • Click here to view the RAM Mount Vehicle Laptop installation video.
  • NOTE: If your vehicle is equipped with an airbag sensor under the seat disconnect the sensor before installing the vehicle base. (If unsure contact your local car dealer.) The video shown is for installation reference and may show additional or less parts than your vehicle base (RAM stabilizer foot that attaches to the base/lower tele-pole as shown in the video). Simply follow the video without installing these components if your vehicle base does not include these parts. Your vehicle base may connect to the seat track bolts differently than shown in the video. The instructions shown to install the RAM tele-pole system, swing arm assembly and Tough Tray are the same for all RAM No-Drill laptop systems regardless of the vehicle base used.
  • NOTE: Click here to view Airbag Safety and RAM Mounting Systems (Adobe required).


Browse for more products in the same category as this item:

Police Mounts
Shop by Auto Manufacturer > All Makes and Models
Shop by Auto Manufacturer > Ford
Crossover & SUV Mounts > Ford > Police Interceptor Utility