Home > Apple Assemblies with Cradle > iPad Assemblies > iPad Mini (1st Gen) Assemblies >

Handlebar Mount with Zinc U-Bolt (Fits .5 to 1.25 Dia.), Std. Sized Length Arm and RAM-HOL-UN8BU SMALL Universal Tablet Holder fits MOST 7-8" Screens Tablets (Fits Device Width 2.5" to 5.75")
Handlebar Mount with Zinc U-Bolt (Fits .5 to 1.25 Dia.), Std. Sized Length Arm and RAM-HOL-UN8BU SMALL Universal Tablet Holder fits MOST 7-8" Screens Tablets (Fits Device Width 2.5" to 5.75")


 
Alternative Views:


Price $67.99

STOCK STATUS: In Stock - Ships Next Bus. Day

Product Code: RAM-B-149Z-UN8U
Qty:

DESCRIPTION TECHNICAL SPECS
 
The RAM-B-149Z-UN8U consists of the universal spring loaded X-Grip II holder (RAM-HOL-UN8BU fits most 7 inch screen tablets), double socket arm and zinc coated metal u-bolt that will accommodate rails from 0.5" to 1.25" in diameter. The base includes black cover caps to be placed over the exposed ends of the u-bolt. The included composite rail adapter can narrow the rail to a minimum width of 0.5 inch. 

NOTE:
Not recommended for high vibration or motorcycle use.

This table holder is compatible, see full specs below, with the following devices:
  • Amazon Kindle
  • Apple iPad Mini
  • Archos 7
  • Asus EEE Pad Memo
  • Barnes & Noble NOOKcolor
  • BlackBerry PlayBook
  • Dell Streak 7
  • Google Nexus 7
  • HTC Flyer
  • Samsung Galaxy
  • Most 7 inch screen tablets that fit within the specs listed below.

NOTE: As the manufacturer adds new units/models to the above series this cradle may fit additional models not listed above. Contact or email us by clicking here.

NOTE: It's VERY IMPORTANT to verify the dimensions of your tablet with or without a sleeve/case when determining the overall size.

RAM-B-149Z-UN8U shown above. Electronic device not included.

RAM-B-149Z-UN8U Manufacturer Included Features:
NOTE:
Manufacturer features can change without notice. Please visit the manufacturer's website for the latest product information. 
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Click on individual links to view more information.
  • Included Base: RAM-B-231ZU black powder coated marine grade aluminum motorcycle handlebar or universal rail base with 1 inch diameter rubber ball.
    • Fits rail diameter from .5 to 1.25 inches.
    • Includes 1 inch zinc u-bolt that fits rail diameter from .75 to 1 inch.
    • Includes 1.25 inch zinc u-bolt that fits rail diameter up to 1.25 inches.
    • Includes two nuts, u-bolt plastic caps and the RAP-319 composite reducer that allows a rail diameter down to .5 inch when used with the 1 inch zinc u-bolt.
  • Optional Stainless Steel U-bolts:
    • RAM-HAR-SU2511.0 inch stainless steel u-bolt, is available. 
    • RAM-SU2512U 1.25 inch stainless steel u-bolt, is available. 
  • Included Arm: RAM-B-201U black powder coated marine grade aluminum standard sized length arm for 1 inch balls.
    • Measures 3.0 inches between socket centers.
    • Measures 3.6875 inches in overall total length.
    • The arm allows for easy adjustment by loosening the plastic side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached base accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories.
  • Holder Material: Black high strength composite and rubber tips.
  • X Grip II RAM-HOL-UN8BU Holder Features:
    • Spring loaded holder expands and contracts for perfect fit of your table.
    • Rubber coated tips will hold your tablet firm and stable.
    • Versatility of holder allows for attachment to many RAM-to-RAM ball and 1" socket mounts.
    • Socket technology allows for multiple adjustment angles and articulation of your tablet.
    • Easy access grip knobs, located on the back of the holder for quick release of your tablet.
  • X Grip II RAM-HOL-UN8BU Holder Dimensions:
    • Minimum Width = 2.25 inches
    • NOTE: (Devices 2.25" in width must be a minimum of 7" in height to fit)
    • Maximum Width = 5.75 inches
    • Depth= 0.875 inches
  • Manufacturer's RAM-HOL-UN8BU Description: The RAM-HOL-UN8BU consists of a spring loaded holder and 1" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN8BU expands and contracts for perfect fit of most 7 inch tablets.


Instructions
  • Click here to view installation instructions for the RAM-B-149 and RAM-B-231 series.

ACCESSORIES FOR THIS PRODUCT...
Universal 2.5 Inch Round Aluminum Plate with 1 Inch Dia. Rubber Ball (AMPS Hole Compatible) Handlebar or Rail Base (Fits .5" to 1" Rail Diameter) CHROME with Zinc U-Bolt and 1 Inch Ball Double Socket CHROME Standard Sized Length Arm for 1 Inch Ball Double Socket LONG Length Sized Arm for 1 Inch Ball (6.0 Inches Overall Length)
Price $8.49

Add
Price $33.99

Add
Price $56.49

Add
Price $20.99

Add
Universal 2.5 Inch Round Aluminum Plate with 1 Inch Dia. Rubber Ball (AMPS Hole Compatible) Handlebar or Rail Base (Fits .5" to 1" Rail Diameter) CHROME with Zinc U-Bolt and 1 Inch Ball Double Socket CHROME Standard Sized Length Arm for 1 Inch Ball Double Socket LONG Length Sized Arm for 1 Inch Ball (6.0 Inches Overall Length)
Universal Aluminum Diamond Plate with 1 Inch Ball Dia. Rubber Ball (AMPS Hole Compatible) Double Socket Arm Keyed Lock for RAM-B-201 Series with 1/4"-20 Brass Hole
Price $7.99

Add
Price $25.99

Add
Universal Aluminum Diamond Plate with 1 Inch Ball Dia. Rubber Ball (AMPS Hole Compatible) Double Socket Arm Keyed Lock for RAM-B-201 Series with 1/4"-20 Brass Hole


Browse for more products in the same category as this item:

Apple Assemblies with Cradle > iPad Assemblies > iPad Mini (1st Gen) Assemblies