RAM-101U-225-XAT1 RAM Mount 1.5" C Size Ball Mount Assembly w/ Backing Plate

The RAM-101U-225-XAT1 is a C sized 1.5 inch ball flat surface marine grade aluminum mount. 2 inch x 2.5 inch rectangular base with included backing plate, standard sized length arm and 2.5 inch diameter plate with pre-drilled holes (hardware not included for 2.5 inch diameter plate).

RAM-101U-225-XAT1 shown above.

RAM-101U-225-XAT1 Includes the Following:

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Color/Material: Black power coated marine grade aluminum.
Socket Ball Size: C-Ball Size = 1.5 inch Ball. Maximum suggested weight 10 lbs.
Base Plate: RAM-202U-225 2 inch X 2.5 inch base with 4 pre-drilled holes at each corner.
Backing Plate: RAM-202-225BU 3” x 3” steel backer plate with 10-24 threaded holes. Purchase Includes: (QTY. 1), 3” x 3” steel backer plate with 8 x 10-24 tapped holes, AMPS and 1.5” x 2” hole patterns (QTY. 4), 10-24 x 1” pan head, phillips drive screws with thread locker applied (QTY. 4), 10-24 black zinc plated nylock nuts
Arm: RAM-201U standard sized length sized arm for 1.5 inch balls. The arm measures 4.55 inches between socket centers (5.625 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction.
Adapter Plate: RAM-202U 2.5 inch diameter base with pre-drilled holes and 1.5 inch diameter rubber ball. The pre-drilled holes accommodate the AMPS hole pattern. Hardware NOT INCLUDED.
Overall Length: 7.35 inches at maximum extension and the mount is collapsible.

RAM-201U Options (Not Included): The RAM-KNOB5LU shown below is a keyed lock and replaces the twist knob found on the RAM-201 series arm.

themountdepot.com

VEHICLE LAPTOP MOUNTS

Mounts by Application

.