Home > iPhone Adhesive Base Assemblies >

2.5 Inch Adhesive Base with Composite Standard Sized Arm and RAM-HOL-AP14U Apple iPad Mini 1st Gen & iPad Mini 3 WITHOUT Case or Cover
2.5 Inch Adhesive Base with Composite Standard Sized Arm and RAM-HOL-AP14U Apple iPad Mini 1st Gen & iPad Mini 3 WITHOUT Case or Cover


 

STOCK STATUS: Out of Stock - Email for ETA


Product Code: RAP-B-378-AP14U
QTY:

DESCRIPTION
 
The RAP-B-378-AP14U is a 2.5 inch diameter adhesive disk base, plastic arm and composite cradle designed to fit the following devices:
  • Apple iPad Mini (1st Gen) WITHOUT Case, Cover or Skin
  • Apple iPad Mini 3 WITHOUT Case, Cover or Skin

NOTE: Click here for more detailed information on the RAM-HOL-AP14U. Please call 224-578-9162 or complete the product inquiry form by clicking here.
RAP-B-378-AP14U shown above.

RAP-B-378-AP14U Includes the Following:
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Included Base: RAP-B-378U 2.5 inch adhesive disk base with 1 inch diameter rubber ball. Put the base practically anywhere you want to keep your handheld device easy to see and always within your reach. Designed with a very small foot print, finding a home on your dash or console is easy.
  • Included Arm: RAP-B-201U composite arm measures approximately 2.875 inches between socket center to socket center and is 3.69 inches in total length. A tightening knob on the side of the arm enables the sockets to clamp firmly to a RAM 1 inch diameter ball. When loosening the side knob, you can pivot the ball and socket connections or completely disconnect the ball from the socket.
  • Manufacturer's Cradle Description: The RAM-HOL-AP14U consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle.
  • Cradle Features:
    • Compatible with various iPad cable/docking accessories.
    • Patent pending roller design for super smooth placement and removal of the iPad.
    • High strength materials maximize longevity of cradle.
    • Full access to all ports.
  • Cradle Specifications:
    • Docking Cradle: No
    • Locking Cradle: No
    • Fit's Tablet's WITH Cases: No
    • Fit's Tablet's WITHOUT Cases: Yes
    • Low Vibration Environment: Yes
    • High Vibration Environment: Yes
Instructions
  • General recommendations to properly adhere the adhesive disc.
    1. Ensure that both the dashboard surface and the bottom of the Ram Mount base have been thoroughly cleaned and dried.
    2. Attach either side of adhesive to the base first, let it sit several hours to allow adhesive to thoroughly bond.
    3. Attach other side of adhesive (with base) to the dashboard surface.
    4. Let the adhesive disc sit several hours before adding socket arm components, etc. to allow the adhesive to properly bond to the dashboard surface.

ACCESSORIES FOR THIS PRODUCT...
Universal X Grip Spring Loaded Holder with 1" B-Sized Ball (Fits Medium Sized Smartphones with Device Width from 1.875" to 3.25") RAM-HOL-UN5U Universal Large Sized (Fits Device Width 1.75" to 3.5") Spring Loaded Clamping Holder with Rubber Bumpers (Fits Most Smartphones with Cover/Case iPhone, Droid, etc.) COMPOSITE Universal 2.5 Inch Round Plate with 1 Inch Ball and 1/4"-20 Male Camera Stud COMPOSITE Double Socket Short Sized Length "A" Arm for 1 Inch Ball (2.38 Inches Overall Length)
Price $33.99

Add
Price $14.99

Add
Price $11.99

Add
Price $9.99

Add
Universal X Grip Spring Loaded Holder with 1" B-Sized Ball (Fits Medium Sized Smartphones with Device Width from 1.875" to 3.25") RAM-HOL-UN5U Universal Large Sized (Fits Device Width 1.75" to 3.5") Spring Loaded Clamping Holder with Rubber Bumpers (Fits Most Smartphones with Cover/Case iPhone, Droid, etc.) COMPOSITE Universal 2.5 Inch Round Plate with 1 Inch Ball and 1/4"-20 Male Camera Stud COMPOSITE Double Socket Short Sized Length "A" Arm for 1 Inch Ball (2.38 Inches Overall Length)
COMPOSITE Double Socket Standard Sized Length Arm for 1 Inch Ball (3.69 Inches Overall Length) Universal Aluminum Diamond Plate with 1 Inch Ball Dia. Rubber Ball (AMPS Hole Compatible) 2.5 Inch Adhesive Base with 1 Inch Diameter Ball 1/4"-20 Male Aluminum Camera Stud with 1 Inch Rubber Ball
Price $11.99

Add
Price $8.99

Add
Price $15.99

Add
Price $10.99

Add
COMPOSITE Double Socket Standard Sized Length Arm for 1 Inch Ball (3.69 Inches Overall Length) Universal Aluminum Diamond Plate with 1 Inch Ball Dia. Rubber Ball (AMPS Hole Compatible) 2.5 Inch Adhesive Base with 1 Inch Diameter Ball 1/4"-20 Male Aluminum Camera Stud with 1 Inch Rubber Ball


Browse for more products in the same category as this item:

iPhone Adhesive Base Assemblies
Adhesive Base Stick Mounts > RAP-B-378 (1 Inch Ball and Socket Arm) Assemblies with Cradle > Tablet Assemblies
Adhesive Base Stick Mounts > RAP-B-378 (1 Inch Ball and Socket Arm) Assemblies with Cradle > Apple Assemblies