Home > Apple Mounts and Cradles > Apple Complete Assemblies with Cradle by Device Type (i.e., iPad, iPhone, iPod, etc.) > iPhone Assemblies with Cradle > All iPhones (UN7 X Gripping Cradle) WORKS WITH Case/Cover/Skin* >

  Universal COMPOSITE Clamp Base (Fits Rail/Edge Lip from 0.625 to 1.25") with Standard Sized Arm & RAM-HOL-UN7BU Universal X Grip Spring Loaded Holder (Fits Device Width .875" to 3.25") for iPhone, etc



 
Alternative Views:


Price $50.50


STOCK STATUS:In Stock

AVAILABILITY: Ships within 24 Hours
Product Code: RAP-B-121-UN7U
Qty:

DESCRIPTION
 
The RAP-B-121-UN7U is a composite clamp base mount assembly that will accommodate a rail or edge lip from 5/8 inch to 1.25 inches (commonly used in aviation or golf cart applications). The assembly includes a standard sized length armand universal X gripping holder.

This holder (RAM-HOL-UN7BU) will accommodate electronic devices (such as the iPhone, Droid, smartphones with a thin case or skin) within the following dimensions:
  • Minimum Width = 0.875"
  • NOTE: Devices at 0.875" must be a minimum of 4" in height to fit into holder
  • Maximum Width = 3.25"
  • Depth = 0.875"
This holder is compatible, but not limited, to the following cases/skins/bumpers:

NOTE: Questions? Contact us by clicking here.


RAP-B-121-UN7U shown above

RAP-B-121-UN7U Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Color/Material: Composite with 1 inch diameter rubber ball. 
  • Socket Ball Size: B-Ball Size = 1.0 inch Ball. Maximum suggested weight 5 lbs.
  • Included Base: RAP-B-121BU composite clamp mount base fits a rail diameter from 5/8 inch to a maximum of 1.25 inches. The 1 inch rubber ball sits at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. To mount the base, simply place the yoke clamps around the rail and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes and unusual shaped motorbike rails. The rail does not need to be perfectly round to use this base.
    • Second Mounting Ball: Optional. Add the RAP-B-121BBU creating a double ball base. This 1 inch diameter ball allows a second mounting point to add additional accessories. The mounting point is located on top of the RAP-B-121BU base.
  • Manufacturer's Base Description: The RAM composite glareshield/yoke base is ideally suited for a day on the wing and yet easily removed for travel in the flight bag. Both strong and light weight, this new clamping base is perfect for numerous electronic devices commonly found in the cockpit. Modular in design, switch out the clamps for a perfect fit no matter what the mounting surface, or add a second ball to mount another device; brilliant. Crafted to hold firm to most glare shields, yokes, or tubing, practically any aircraft can benefit from this product. Simple to use and exceptionally versatile, RAM has created another “must have” for any pilot. Once you’ve had a chance to use this great little device, we’re confident you’ll find uses for it no matter what you fly, drive, or ride. With everything you get in this package, you may even find yourself using your new RAM Mount on a golf cart, work bench, or even exercise equipment. With RAM, there are no limits. 
The composite glareshield/yoke mount will fit a rail or edge lip from 5/8" to a maximum of 1.25". The mounting base can also accept a second optional ball RAP-B-121BBU giving you the ultimate double ball base. To mount the base, simply place the clamp ends around the rail and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes, golf buggies or unusual shaped motorbike rails.

  • Included Arm: RAP-B-201U composite standard sized length arm for 1 inch balls. The arm measures 3.0 inches between socket centers (3.6875 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction.
  • Included Holder RAM-HOL-UN7BU:
    • Spring loaded holder expands and contracts for perfect fit of your device.
    • 1 inch rubber diameter rubber ball is attached to the cradle.
    • Rubber coated tips will hold device firm and stable.
    • Versatility of holder allows for attachment to many RAM-to-RAM ball mounts.
    • Single socket technology allows for multiple adjustment angles and articulation of device.
  • Manufacturer's Cradle Description: Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.



Browse for more products in the same category as this item:

Apple Mounts and Cradles > Apple Complete Assemblies with Cradle by Device Type (i.e., iPad, iPhone, iPod, etc.) > iPhone Assemblies with Cradle > All iPhones (UN7 X Gripping Cradle) WORKS WITH Case/Cover/Skin*
Cell / Smartphone Mounts > Universal Cell & Smartphone Assemblies by Device Width (Fits Width Range from .875" to 3.5") > UN7 Series Assemblies (.875" to 3.25" Device Width)
Cell / Smartphone Mounts > Aviation Universal Cell & Smartphone Assemblies > X Gripping Universal Assemblies
Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Yoke Mount Assemblies (Fits .5" to 2.58" Rail Diameter) > Composite C Clamp RAP-B-121 Series Assemblies (Fits Rail/Edge Lip from 0.625" to 1.25") > Universal (iPhone, Smartphone, Netbook, Tablet, etc.) Assemblies


Universal COMPOSITE Clamp Base (Fits Rail/Edge Lip from 0.625" to 1.25") with Standard Arm and with Garmin RAM-HOL-GA31U Holder (Selected Oregon 200/300/400/450/550 & Approach Series) $33.75
Universal COMPOSITE Clamp Base (Fits Rail/Edge Lip from 0.625" to 1.25") with Standard Sized Arm and RAM-HOL-BC1U Holder for Hand Held Devices and 2 Way Radios $33.40
Single 3.25" Dia. Base with Twist Lock, Plastic Dual Pivot Arm and RAM-HOL-PD3U Universal Top Clamping Cradle (Fits Device Width 2.25" to 3.5" Including Most Smartphones with Cover/Case iPhone, Droid, etc.) $42.15
Single 3.25" Dia. Base with Twist Lock, Plastic Dual Pivot Arm (No Adapter) $22.25
Composite Diamond Base Plate with Standard Sized Arm and Diamond Shape Mounting Plate $16.35
Universal PLASTIC Diamond Plate with 1 Inch Ball $4.95
Triple 3.25" Dia. Suction Cup Base with Twist Lock, Standard Sized Length Arm and 75mm VESA Plate (Heavy Duty) $77.30
Single 2.7" Dia. Suction Cup Base with Twist Lock, PLASTIC Arm and Diamond Adapter Plate (Light Duty) $15.05
RAM ROD 2007 Holder with Square Base for Boats $20.15