Home > Cell / Smartphone Mounts > Suction Cup Universal Cell & Smartphone Assemblies >

  Single 3.25" Dia. Base with Twist Lock, Plastic Dual Pivot Arm and RAM-HOL-PD3U Universal Top Clamping Cradle (Fits Device Width 2.25" to 3.5" Including Most Smartphones with Cover/Case iPhone, Droid, etc.)



 
Price $42.15


STOCK STATUS:In Stock

AVAILABILITY: Ships within 24 Hours
Product Code: RAP-B-104-224-PD3U
Qty:

DESCRIPTION
 
The RAP-B-104-224-PD3U is a universal high strength composite suction cup mount with a 3.25 inch diameter locking suction cup base and universal electronic device top gripping cradle. The cradle will fit devices within the following dimensions:
  • Height Range: 4.75'' - 6.25''
  • Width Range: 2.25'' - 3.25''



RAP-B-104-224-PD3U shown above.

RAP-B-104-224-PD3U Includes the Following:
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Mount End Plate Design: The RAP-B-238 RAM Mount High Strength Plastic Composite Universal Plate has a 1.0 inch diameter rubber ball connected at right angles to a 1 1/4 x 2 1/2 inch Diamond Plate. The plate has two holes positioned at either tip of the diamond plate.
  • Mount Arm Design: The RAP-B-200-1 RAM Mount Socket and Octagon Button Arm includes a 1 inch B sized ball socket and is made of high strength plastic. The arm is 1.75 inches long when measured from socket center to button socket end. The side of the arm includes a tightening knob which allows you to open and close the socket ends.
  • Mount Base Design: The RAP-224-2 RAM Mount high strength plastic locking 3.25 inch diameter rubber suction cup base is designed to have an extra strong hold on any smooth non-porous surface. With a twist on the locking knob, the suction cup base adheres to any glass or non-porous plastic surface. Connected to the top of the RAM suction cup is a male RAM plastic octagon button with pivot connection. The pivot design allows the mount to tip from 0° to 90° to the suction cup, while the octagon button connections allows the arm to rotate 360°. The button end connects directly to a RAP-B-200-1 plastic arm with socket and female button ends.
  • Cradle: RAM-HOL-PD3U high strength plastic spring loaded top clamping cradle that expands top to bottom to hold electronic devices securely. Four clamp pins are supplied; these can be positioned to suit the width and shape of electronic devices and smartphones. Below are the dimensions the cradle will accommodate.
  • CRADLE CLAMPING DIMENSIONS:
    • Height Range: 4.74'' - 6.25''
    • Width Range: 2.25'' - 3.25''

  • Optional Cradles. To view other optional cradles for Apple, cell phone or GPS units click here.



Browse for more products in the same category as this item:

Cell / Smartphone Mounts > Suction Cup Universal Cell & Smartphone Assemblies
Suction & Adhesive Mounts > Suction Cup Assemblies with Cradle (Garmin, Lowrance, Magellan, TomTom, GPS, Smartphone, Universal, etc.) > RAP-B-104-224 Series Assemblies > Smartphone and Universal Assemblies
Suction & Adhesive Mounts > Apple Suction Cup Assemblies and Cradles > iPhone Assemblies > iPhone 4 (4th Gen, 4G, 4S) Assemblies
Suction & Adhesive Mounts > Apple Suction Cup Assemblies and Cradles > iPhone Assemblies > iPhone (2nd & 3rd Gen, 3G/3GS) Assemblies
Suction & Adhesive Mounts > Apple Suction Cup Assemblies and Cradles > iPhone Assemblies > iPhone (1st Gen, Non 3G) Assemblies
Suction & Adhesive Mounts > Apple Suction Cup Assemblies and Cradles > iPod Touch > iPod Touch (4th Gen) Assemblies
Suction & Adhesive Mounts > Apple Suction Cup Assemblies and Cradles > iPod Touch > iPod Touch (2nd & 3rd Gen) Assemblies
Suction & Adhesive Mounts > Apple Suction Cup Assemblies and Cradles > iPod Touch > iPod Touch (1st Gen) Assemblies
Cell / Smartphone Mounts > Universal Cell & Smartphone Assemblies by Device Width (Fits Width Range from .875" to 3.5") > PD3U Series Assemblies (2.25" to 3.5" Device Width)
Apple Mounts and Cradles > Apple Complete Assemblies with Cradle by Device Type (i.e., iPad, iPhone, iPod, etc.) > iPhone Assemblies with Cradle > All iPhones (PD3U Top Clamping Cradle) WORKS WITH Case/Cover/Skin


Single 3.25" Dia. Base with Twist Lock, Plastic Dual Pivot Arm (No Adapter) $22.25
Composite Diamond Base Plate with Standard Sized Arm and Diamond Shape Mounting Plate $16.35
Universal PLASTIC Diamond Plate with 1 Inch Ball $4.95
Triple 3.25" Dia. Suction Cup Base with Twist Lock, Standard Sized Length Arm and 75mm VESA Plate (Heavy Duty) $77.30
Single 2.7" Dia. Suction Cup Base with Twist Lock, PLASTIC Arm and Diamond Adapter Plate (Light Duty) $15.05
RAM ROD 2007 Holder with Square Base for Boats $20.15
Triple Base Adapter $9.35
Easy Mount Quick Release Male Adapter for RAM-B-238U $3.60
Handlebar or Rail Base U-Bolt Adapter for RAM-B-231 and RAM-B-149 Series $2.10