RAP-B-102U shown above. Mounting hardware not included.
RAP-B-102U Includes the Following:
- Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
- Color/Material: Black composite/plastic.
- Socket Ball Size: B-Ball Size = 1.0 inch Ball. Maximum suggested weight 2 lbs. For heavier applications see the RAM-B-102U max. weight 5 lbs.
- Base: RAP-B-238U universal diamond plate with two holes measuring 1.9 inches from hole center to hole center and accommodate the AMPS hole pattern.
- Arm: RAP-B-201U standard sized length arm for 1 inch balls. The arm measures 2.875 inches between socket centers (3.6875 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction. A shorter arm RAP-B-201U-A, 1.75 inches from socket center to socket center, is available.
- Adapter: RAP-B-238U universal diamond plate with two holes measuring 1.9 inches from hole center to hole center and accommodate the AMPS hole pattern.
- Hardware Included: No. Mounting hardware is not included. Most cradles and holders include mounting hardware to attach to the RAP-B238U.
- Cradle/Holders/Aqua Box:
Optional. Select a holder for Apple, cell phones, GPS systems and electronic devices by clicking here
RAP-B-201U Description: Black composite arm allows a 1 inch diameter ball accessory to be connected at either end. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached accessories. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories.
RAP-B-238U Description: Black composite diamond plate measures 1.25 inches * 2.5 inches. This diamond plate connects to a 1 inch diameter rubber ball. The diamond plate has two holes positioned 1.9 inches from center to center. The hole pattern found on the diamond plate will connect to a large variety of third party cradles and mounts (including RAM holders RAM-HOL-xxxx) and including those with the industry standard AMPS hole pattern.
