RAM-HOL-TAB6U RAM Mount Tablet Cradle for iPad Air, Motorola XOOM, Samsung GALAXY Tab 10.1 2014 Edition

The RAM-HOL-TAB6U Tab-Tite is a high strength composite spring loaded, quick release cradle designed to hold the following devices within the following dimensions:

Height: 8.625" minimum to 11.25" maximum
Width: 6.05 to 6.8 inches
Edge Depth: 0.13 to 0.50 inches

RAM-HOL-TAB6U cradle shown above. Electronic device not included.

RAM-HOL-TAB6U Features:

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Cradle Material: Black high strength composite.
Cradle Hole Pattern: The back of the cradle has two pre-drilled holes compatible with the AMPS hole pattern (1.912 inches from center hole to center hole).
Cradle Features:
1. Support cups contain open slots to accommodate with or without bumpers/cases sleeves.
2. Back plate can support various size support cups.
3. Spring loaded tension provides secure support of your tblet
4. Spring loaded cradle allows for quick release of yoiur tablet.
5. The cradle allows all cables (NOT INCLUDED) to stay connected and all buttons/ports remain accessible.
Cradle Dimensions:
- Height: 8.625" minimum to 11.25" maximum
- Width: 6.05 to 6.8 inches
- Edge Depth: 0.13 to 0.50 inches
Cradle Hardware: Includes a set of nuts and bolts to connect to the OPTIONAL RAM-B-202U adapter plate.
Manufacturer's Description: Get the most out of your tablet with the RAM Tab-Tite™ spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your tablet. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. When purchasing a new tablet, new detachable support cups are the only components needed for purchase. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.

Below are optional mounting assemblies that can be attached directly to the RAM Mounts cradle and popular accessories. Note many of the complete assemblies shown below are with the RAM-B-238U diamond adapter plate. 

Additional Cradles for Electronic Devices:
- Select another cradle for Apple, cell phones, GPS systems and other electronic devices by clicking here.

Universal Diamond Adapter Plate for Apple iPad:
- RAM-B-238U diamond shaped adapter plate is the most common type of adapter used to attach to RAM-HOL-AC3U cradle. The RAM-B-238U is required to attach to any RAM 1 inch ball sized arm.