Home > Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Glare Shield RAM-B-177 Series Assemblies (Fits Flat Edge 0.17" to 1.12") > Garmin Assemblies >

  U Clamp (Aviation Glare Shield) Fits Flat Edge 0.17" to 1.12" with Short Sized Arm and Garmin RAM-HOL-GA38U Holder (Selected GPSMAP 695 & 696 Series)
 
 
Price $51.10


STOCK STATUS:In Stock

AVAILABILITY: Ships within 24 Hours
Product Code: RAM-B-177-GA38U
Qty:

DESCRIPTION
 
The RAM-B-177-GA38U is a marine grade aluminum U channel clamp base designed to mount to the lip edge of a flat surface 1.12 inches thick such as a glare shield on an airplane or car side window edge lip, short sized length arm, round adapter plate and cradle for the device(s) specified below:
  • Garmin GPSMAP 695
  • Garmin GPSMAP 696
NOTE: As the manufacturer adds new units/models to the above series this cradle may fit additional models not listed above. Click here for the most current model information on the RAM-HOL-GA38U. Please call 224-578-9162 or complete the product inquiry form by clicking here. 
RAM-B-177-GA38U shown above.
 
RAM-B-177-GA38U Manufacturer Included Features:
NOTE: Manufacturer features and specifications can change without notice. Please visit the manufacturer's website for the latest product information. 
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Dimensions: Click on individual links to view more information.
  • Included U Channel Base Clamp: RAM-B-259U powder coated marine grade aluminum u-channel clamp base. This glare shield clamp mount with clamp mounts is designed to mount to the lip edge of a flat surface up to 1.12 inches thick. 
    • This base will attach to flat surfaces with the following dimensions:
      Min: 4.4mm / 0.17 inches
      Max: 28.0mm / 1.12 inches
    • Includes two plastic bolts that, when tightened, clamp the base to the lip surface.
    • 1 inch diameter rubber ball is connected to the base.
  • Included Arm: RAM-B-201U-A black powder coated marine grade aluminum short sized length arm for 1 inch balls.
    • Measures 1.75 inches between socket centers.
    • Measures 2.4375 inches in overall total length.
    • The arm allows for easy adjustment by loosening the plastic side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached base accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories.
    • Optional Arms:
      • RAM-B-201U 2.875 inches from socket center to socket center is available.
      • RAM-B-201U-C 5.25 inches from socket center to socket center is available.
  • Included Adapter: RAM-B-202U black powder coated marine grade aluminum universal round plate with attached 1 inch diameter rubber ball.
    • Compatible with AMPS hole pattern. The adapter will connect to RAM cradles (RAM-HOL-xxxx series) and third party cradles with the AMPS hole pattern.
  • Included Cradle: RAM-HOL-GA38U high strength plastic holder for the devices specified above attaches to the RAM-B-238U adapter. Place the top of the device into the cradle, and then push the base into the expandable arms at the bottom of the holder. The arms will then snap into place when the device is completely secured in the cradle. The cradle allows all cables (NOT INCLUDED) to stay connected and controls to be operated while the device is in the cradle. 
  • Optional Cradles/ Holders/ Aqua Box: Click here to see optional cradles that can be purchased for the RAM-B-177 series including: Apple, cell, GPS and waterproof aqua boxes with soft touch flex lens.


Browse for more products in the same category as this item:

Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Glare Shield RAM-B-177 Series Assemblies (Fits Flat Edge 0.17" to 1.12") > Garmin Assemblies


RAM-A-Can with 6" Flexible Arm and Garmin RAM-HOL-GA30U Holder (Selected nuvi 800 Series) $40.10
Universal RAM Pod III Three Leg Mount with Tough Tray II for Small to Med. Sized Devices (Fits iPad with Case/Cover & Various Tablets, Netbooks) $152.75
Universal 2.5 Inch Adhesive Flex Stick Base with Apple RAM-HOL-AP7U Holder (iPod Touch 2nd & 3rd Gen WITHOUT Case or Cover) $17.30
U Clamp (Aviation Glare Shield) Fits Flat Edge 0.17" to 1.12" with Short Sized Arm and Garmin RAM-HOL-GA14U Holder (Selected GPSMAP 76(C,CS,CSX) and 96(C) Series) $39.90
Handlebar Mount with Zinc U-Bolt (Fits .5 to 1.25 Dia.), Standard Sized Length Arm & Apple RAM-HOL-AP1U Holder (iPod Classic Gen 1 to Gen 5 WITHOUT Case or Cover) $33.95
Lil' Buddy Universal Mount with TomTom RAM-HOL-TO9U Holder (Selected GO 740 Live Series) $16.80
Single 3.25" Dia. Suction Cup Base with Twist Lock, Aluminum Standard Length Sized Arm and 2.5" Dia. Plate with 1/4"-20 Male Camera Stud (Medium Duty) $33.25
Universal 2.5 Inch Adhesive Base with RAM-HOL-AP9U Apple iPhone 4 Holder (4th Gen/4S WITHOUT Case or Cover) $13.05
RAM-A-Can with 6" Flexible Arm and Garmin RAM-HOL-GA28U Holder (Selected nuvi 5000 Series) $37.45