Home > Marine / Fishing Mounts > Fish Finder and Chartplotter Assemblies (Eagle, Garmin, Humminbird, Lowrance, Raymarine, etc.) > 1.5" C-Ball Sized Assemblies (10 Pound Max) > Misc. RAM "C" Series Assemblies >

  Single Strap Base (RAM-108BU Fits .5 to 2 Inch Rail Diameter), Standard Sized Length Arm and Universal Round Plate with 1.5 Inch Dia. Ball



 
Price $45.05


STOCK STATUS:In Stock

AVAILABILITY: Ships within 24 Hours
Product Code: RAM-108-1
Qty:

DESCRIPTION
 
The RAM-108-1 is a marine grade aluminum V base rail mount with a standard sized length arm and universal round plate with AMPS hole pattern. This mount is commonly used as a trolling motor stabilizer.


RAM-108-1 shown above. Often used for trolling motor stabilizer.

RAM-108-1 Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Material: Black powder coated marine grade aluminum.
  • Ball Size: C ball sized 1.5 inch diameter rubber ball. Maximum weight 10 lbs.
  • Base Included: RAM-108BU shown below is a black powder coated marine grade aluminum single strap base with 1.5 diameter rubber ball and metal strap. The metal straps (2 included) will accommodate a rail diameter from .5 inch to 2 inches. 
       
  • Arm Included: RAM-201U shown below is the standard length double socket arm that measures 4.55 inches between socket centers and 5.625 inches in overall length. The arm is black powder coated marine grade aluminum with a plastic twist knob and accepts 1.5 inch diameter balls. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached accessories. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!
   
  • Plate Included: RAM-202U shown below is a universal 2.5 inch diameter round plate with pre-drilled holes that can be used to connect to a large variety of third party cradles and holders (RAM Mounts plastic holders and aqua boxes, i.e. RAM-HOL-xxxx) including those with the industry standard AMPS hole pattern. The plate is black powder coated marine grade aluminum with a 1.5 inch diameter rubber ball.
   

RAM-108-1 Arm Length Option (NOT INCLUDED) Below:
  • Arm Length Option Shown Below (NOT INCLUDED):
    • RAM-201U-D long "D" arm 8.75 inches from socket center to socket center is available.
       

Security and Portability Options (NOT INCLUDED): The RAM-KNOB-5LU is a popular option. A keyed twist lock knob replaces the twist knob on the RAM-201 series arm.

Accessories for this product...
RAM-HOL-AQ6U RAM-108-1B RAM-108BU RAM-201U-B
Price $40.95
Add
Price $15.25
Add
Price $14.90
Add
Price $18.50
Add
RAM-KNOB5LU RAM-201U-D
Price $17.55
Add
Price $34.40
Add


Browse for more products in the same category as this item:

Marine / Fishing Mounts > Fish Finder and Chartplotter Assemblies (Eagle, Garmin, Humminbird, Lowrance, Raymarine, etc.) > 1.5" C-Ball Sized Assemblies (10 Pound Max) > Misc. RAM "C" Series Assemblies
Marine / Fishing Mounts > Fish Finder and Chartplotter Assemblies (Eagle, Garmin, Humminbird, Lowrance, Raymarine, etc.) > Rail & V Strap Base Assemblies and Parts > 1.5" C-Ball Sized Assemblies and Parts (10 Pound Max)


Marine MOUNTING PLATE with 1.5" Dia. Rubber Ball for Selected Humminbird, Lowrance, Raymarine Apelco Models $18.95
5 Inch Square Rail Clamp with Motorola MC70 Spring Holder $189.50
5 Inch Square Rail Clamp with Scanner Gun $125.00
4 Inch Square Rail Clamp with Motorola MC70 Spring Holder $152.75
4 Inch Square Rail Clamp with Quick Draw Scanner Gun $83.50
4 Inch Square Rail Clamp with Intermec CN3 Spring Holder $159.95
4 Inch Square Rail Clamp with Scanner Gun $83.95
3 Inch Square Rail Clamp with Motorola MC70 Spring Holder $161.95
3 Inch Square Rail Clamp with Quick Draw Scanner Gun $92.95