Home > Camera (GoPro, etc) Mounts > Garmin VIRB Adapter & Assemblies >

COMPOSITE Track Base (RAP-B-383U) with 1.0" Dia. Rubber Ball and Standard Sized Length Arm with RAM-B-202U-GA63 Garmin VIRB Camera Adapter
COMPOSITE Track Base (RAP-B-383U) with 1.0" Dia. Rubber Ball and Standard Sized Length Arm with RAM-B-202U-GA63 Garmin VIRB Camera Adapter


 
Alternative Views:


Price: $44.49

STOCK STATUS: In Stock - Ships Next Bus. Day


Product Code: RAP-B-383-GA63U
QTY:

DESCRIPTION
 
The RAP-B-383-GA63U is a composite mounting kit with a track base (RAP-B-383U) with 1.0 inch diameter rubber ball, standard sized length arm (RAP-B-201U) and adapter plate (RAM-B-202U-GA63) for selected Garmin devices listed below:
  • Garmin VIRB

NOTE: As the manufacturer adds new models this adapter may fit additional models not listed above. Click here for the most current model information or contact us by clicking here.


RAP-B-383-GA63U shown above. Base plate hardware is not included.

RAP-B-383-GA63U Features:
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Adapter Plate Description: RAM-B-202U-GA63 shown below consists of a 1 inch diameter rubber ball, connected to a custom Garmin VIRB camera adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket.
    • Adapter Plate Material: Black powder coated marine grade aluminum.
    • Adapter Plate Ball Size: Connects to a 1.0 inch rubber B sized ball.
  • Arm Included: RAP-B-201U shown below is a standard length composite arm 3.0 inches in length from socket center to socket center and 3.6875 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!

  • Wedge Base Plate Included: RAP-B-383U shown below is a composite track base. The RAP-B-383U is compatible with the following:
    • YakAttack GearTrac
    • Wilderness Systems SlideTrax
    • Most Common T-Tracks
    • Scotty Slide Track
    • Many More!
    • Track Dimensional Range: .250" MIN. - .562" MAX.



Browse for more products in the same category as this item:

Camera (GoPro, etc) Mounts > Garmin VIRB Adapter & Assemblies