RAP-B-379-238U RAM Mount Harley Davidson Mount w/ Diamond Plate

VEHICLE LAPTOP MOUNTS

.

Product Request
Contact Us

CLICK HERE to email for product information or a price request.

RAM Mount Help 101

CLICK HERE for RAM sizing guide and naming convention help.

Home >

Harley Davidson Mirror Post Base (Fits Select Touring Models 2008-2013), Standard Sized Length Arm and Universal Diamond Shaped Plate

Alternative Views:

Price $34.10

STOCK STATUS: In Stock - Ships Next Bus. Day

Product Code: RAP-B-379-238U

QTY:

DESCRIPTION

The RAP-B-379-238U consists of a 1/4"-20 X .25" thread, connected to a 1 inch diameter ball, female blind barrel nut and nylon washer (fits select Harley Davidson touring models), standard sized length arm and universal diamond shaped adapter plate.

RAP-B-379-238U shown above. GPS cradle NOT included.

RAP-B-379-238U Manufacturer Included Features:
NOTE: Manufacturer features and specifications can change without notice. Please visit the manufacturer's website for the latest product information.

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Base Dimensions: 1/4"-20 X .25" thread with 1 inch diameter rubber ball.
Base Description: RAP-B-379-HA1U has a patented rubber ball that dampens shock and vibration helping to maintain the performance of the mounted device. Simple to use and install. Designed to be compact and discrete, the RAP-B-379-HA1U won’t take up a lot of space but will provide a world of mounting possibilities.

Base Fitment: This base secures to the open/unused mirror post found on either the brake or clutch housing assembly on SELECT Harley Davidson touring motorcycles. This base WILL NOT WORK on models where the mirror is attached directly to the brake or clutch housing assembly. The mirror post opening has to be unused (i.e. Street Glides, Electra Glides, etc.) where the mirror is secured to the fairing and NOT the mirror post found on the brake or clutch assembly.
Base Features:
1. Base can be mounted above or below mirror holes
2. Rubber ball dampens shock and vibration
3. High strength materials ensure product longevity
Base Installation Instructions:
1. Locate fairing mirror holes.
2. Place the nylon washer over the barrel nut. Insert the barrel nut into the hole on the controls.
3. Screw the threaded ball into the barrel nut from the other side of the hole. Tighten with 5/8" and 1/2" wrench.
Included Arm: RAM-B-201U black powder coated marine grade aluminum standard sized length arm for 1 inch balls.
- Measures 3.0 inches between socket centers.
- Measures 3.6875 inches in overall total length.
- The arm allows for easy adjustment by loosening the plastic side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached base accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories.
Included Adapter: RAM-B-238U marine grade aluminum adapter plate with 1 inch rubber ball. The adapter has 2 pre-drilled holes 1.912 inches apart from center hole to center hole (AMPS hole compatible). The adapter is commonly used to attached to RAM cradles.