Home > Laptop Accessories > Printer Mounts for Brother, Cannon, Epson, HP, Intermec, Pentac, Zebra, etc > RAM-VPR-104-1 >

Forklift 4 Inch Rail Clamp Printer System (Short Side Clamps) for Epson, Intermec & O'Neil Printers
Forklift 4 Inch Rail Clamp Printer System (Short Side Clamps) for Epson, Intermec & O'Neil Printers


 
Price $120.20

STOCK STATUS: In Stock - Ships Next Bus. Day

Product Code: RAM-VPR-104-247-4
QTY:

DESCRIPTION
 
The RAM-VPR-104-247-4 is a 4 inch square rail clamp base forklift printer cradle system that is the perfect printing solution for the following models:
  • Epson TM-P60
  • Epson T88
  • Intermec PB2
  • Intermec PB3
  • Intermec PB20
  • Intermec PB21
  • Intermec PB22
  • Intermec PB40
  • Intermec PB41
  • Intermec PB42
  • O'Neil 2TE
  • O'Neil 4T
  • O'Neil 4TE
  • O'Neil 4TE with Card Reader
NOTE: This printer system will accommodate other printers with similar dimensions shown below in the technical drawing. Please call 224-578-9162 or complete the product inquiry form by clicking here if you have questions about your printer device.


RAM-VPR-104-247-4 shown above.

The
RAM-VPR-104-247-4 Included Features:
  • Warranty: Manufacturer's, National Products Inc., life time warranty.
  • Material: Black powder coated marine grade aluminum.
  • Cradle Description: The RAM Quick Draw Jr. holders use a unique patent pending spring loaded mechanism that holds strong, yet provides easy removal for printer storage. At each end of the spring loaded cradle, RAM have designed a short side clamp plate that is designed to fit cleanly around either edge of the printer. This is the perfect accessory for the mobile professional who’s on the go. Light weight yet strong, these printer holders help get the job done.
  • Cradle Dimensions:
    • Min Width: 5.625 inches
    • Max Width: 10 inches
    • Height Clearance for Printer: 2.25 inches 
     
  • NOTE: Please see the RAM-VPR-105 series if you need the Tall Side Clamps (11 Max Width to 3.125 Max Height).
  • Mounting Assembly: The RAM-VPR-104-247-4 includes the RAM-101-247-4 forklift assembly shown below:
   

  • Square Rail Clamp Base Included: RAM-247U-4 is a 4 inch square rail clamp base. The square rail base will wrap around a maximum width of 4 inch and is tightened by screwing the two plates together with the included nuts and bolts. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles
   
  • Arm Included: RAM-201U shown below is the standard length double socket arm that measures 4.55 inches between socket centers and 5.625 inches in overall length. The arm is black powder coated marine grade aluminum with a plastic twist knob. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached accessories. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility.
   
  • Mounting Plate Included: RAM-202U shown below is a black powder coated marine grade aluminum 2.5 inch diameter round plate with pre-drilled holes and 1.5 inch diameter rubber ball. The plate will attach to the RAM-201 arm and RAM-VPR-104 cradle.
   

ACCESSORIES FOR THIS PRODUCT...
Double Socket Arm Keyed Lock for RAM-201 Series with 1/4"-20 Brass Hole
Price $28.49

Add
Double Socket Arm Keyed Lock for RAM-201 Series with 1/4"-20 Brass Hole


Browse for more products in the same category as this item:

Laptop Accessories > Printer Mounts for Brother, Cannon, Epson, HP, Intermec, Pentac, Zebra, etc > RAM-VPR-104-1