Home > Shop by Auto Manufacturer > All Makes and Models >

Ford: Ranger (2019-2022), Bronco (2021-Newer) Mount System (No Tray)
Ford: Ranger (2019-2022), Bronco (2021-Newer) Mount System (No Tray)


 
Alternative Views:
Price $226.49 + Free Shipping!

STOCK STATUS: In Stock - Ships Next Bus. Day


Product Code: RAM-VB-202-SW2
QTY:

DESCRIPTION PRODUCT OPTIONS
 
FREE DOMESTIC GROUND SHIPPING!
RAM-VB-202-SW2 vehicle mount system for the following vehicles:
  • FORD RANGER (2019-2022)
  • FORD RANGER (2019-Newer)
    •
NOTE: As auto manufacturers redesign vehicle models this system may or may not fit additional models. If you do not see your vehicle listed contact us or complete the product inquiry form by clicking here.
NOTE: Click here for Airbag Safety and RAM Mounting Systems.
NOTE: For the vehicle base only see the RAM-VB-202 by clicking here.
RAM-VB-202-SW2 Manufacturer Included Components:
NOTE: Manufacturer components can change without notice.
NOTE: Click the links below for pictures and detailed part information.
  • Swing Arm: RAM-VB-110-1U dual swing arms provide 12 inches of total horizontal extension. Includes RAM-202U 2.5 inch diameter plate with AMPS hole pattern.
  • Upper Tele-Pole: RAM-VP-TTM8U 8 inch male upper tele-pole.
  • Lower Tele-Pole: RAM-VB-TBF12U 12 inch female lower tele-pole.
  • NOTE: Tele-poles feature a telescoping vertical height adjustment range from 12 to 18 inches.
  • Vehicle Base: RAM-VB-202 no-drill base for specified vehicles above.
RAM-VB-202-SW2 Manufacturer Specifications:
NOTE: Manufacturer specifications can change without notice.
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Material: Black powder coated steel with composite Tough Tray.
  • Seat Configuration: Bucket seats.
  • Installation: No-drill installation. Utilizes existing vehicle mounting points and hardware.
  • Mount/Base Placement: Passenger side, in front, where seat frame meets floor board.
    • NOTE: Vehicle base will limit seat travel.
  • Vehicle Base Quick Disconnect: OPTIONAL. See RAM-VB-REM1 below.
  • Vehicle Base Dimensions:
    • A = 15 inches
    • B = 8 inches
    • C = 1 inches
    • Center to Center Hole Seat Bolt Distance: 11.5 inches
  • NOTE: Center to Center Hole Seat Bolt Distance is the center hole distance of the two pre-drilled holes in the vehicle base that line up with the vehicle seat bolts. This distance MUST MATCH your vehicle.

RAM-VB-202 Vehicle Base Options (NOT INCLUDED) Shown Below:
  • RAM-VB-REM1 attaches to the vehicle base. This Remove-A-Pole quick disconnect allows the entire laptop system from the vehicle base up to be removed using the quick release pin, no tools required! Perfect for individuals using a vehicle for work and personal use. One of our most popular options.

RAM VB-202-SW1 Popular Tough Tray Options (NOT INCLUDED) Shown Below:

Instructions
  • Click here to view the RAM Mount Vehicle Laptop installation video.
  • NOTE: If your vehicle is equipped with an airbag sensor under the seat disconnect the sensor before installing the vehicle base. (If unsure contact your local car dealer.) The video shown is for installation reference and may show additional or less parts than your vehicle base (RAM stabilizer foot that attaches to the base/lower tele-pole as shown in the video). Simply follow the video without installing these components if your vehicle base does not include these parts. Your vehicle base may connect to the seat track bolts differently than shown in the video. The instructions shown to install the RAM tele-pole system, swing arm assembly and Tough Tray are the same for all RAM No-Drill laptop systems regardless of the vehicle base used.
  • NOTE: Click here to view Airbag Safety and RAM Mounting Systems (Adobe required).


Browse for more products in the same category as this item:

Shop by Auto Manufacturer > All Makes and Models
Shop by Auto Manufacturer > Ford
Pickup Truck & Van Mounts > Ford / Lincoln > Ranger
Crossover & SUV Mounts > Ford > Explorer