Home > Electronic Cradles & Holders > Samsung >

Discontinued - Replaced by RAM-HOL-SAM60P-HARU
Discontinued  - Replaced by RAM-HOL-SAM60P-HARU


 
Alternative Views:




STOCK STATUS: Out of Stock - Email for ETA


Product Code: RAM-HOL-SAM7P-HARU

Additional 1" Ball Adapter Plates

1.0" Ball Adapters:


QTY:  
DESCRIPTION
 
Specifications:
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited 3 Year Warranty.
  • Cradle Material: Black high strength composite.
  • Cradle Hole Pattern: The back of the cradle has pre-drilled holes compatible with the AMPS hole pattern.
  • Cradle Hardware: Includes a set of nuts and bolts to connect to the OPTIONAL RAM-B-202U round shaped adapter plate.
  • Manufacturer's Description: RAM Mounts has partnered with Samsung to develop a powered cradle for the Samsung Galaxy Tab Active2. The cradle has been designed to meet the demands of field workers in a variety of applications including transportation, field sales, logistics, manufacturing and much more. This ultra-low cost cradle provides power to the device through the pogo pin interface on the tablet and can be easily rotated for both portrait and landscape operation of the device. Unique features include access to the NFC reader while in the cradle for scanning NFC tags as well as the stylus. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPS hole pattern. Also included is the GDS® Step Down Converter Charger – an ideal solution for providing power to the Galaxy Tab Active2.
  • Cradle Features:
    1. Access for camera use and all buttons and ports while docked
    2. Ultra-low cost
    3. One handed operation
    4. Works with protective sleeve installed
    5. Access to stylus while in dock
    6. NFC reader accessible while in dock
    7. Can be mounted on a flat vertical or horizontal surface
    8. Charges tablet through 3 pin Pogo connector
    9. Easily rotate for use in portrait or landscape mode

    Charger Specs:
    - Input Range: 8V - 40V DC
    - Output Voltage: 5VDC
    - Output Current: 2.5A max
    - Output Connector Type: 90° DC plug
    - Input Cable Length: 1.2 Meters overall length including 2 Pole Flat Marine Connector
    - Output Cable Length: 1.2 Meters (with included 1M Type-A Male to 5.5mm OD/2.5mm ID 90° DC cable)
    - Operating Temperature Range:
    -10°C to +70°C
    - Storage Temperature Range: -40°C to +70°C
    - Overvoltage/Load Dump Compliance: Meets SAE J-1113
    - Integrated Short Circuit Protection
    - FCC, CE, WEEE, and ROHS Compliant
    - USB 2.0 BC 1.2 DCP Support


ACCESSORIES FOR THIS PRODUCT...
Triple 3.25" Dia. Suction Cup Base with Twist Lock, Standard Length "C" Sized Arm and 2.5" Dia. Adapter Plate (Heavy Duty) Single 3.25" Dia. Suction Cup Base with Twist Lock, Aluminum Standard Length Sized Arm and 2.5" Dia. Plate (Medium Duty) 2.5 Inch Diameter Base with Standard Sized Length Arm and 2.5 Inch Diameter Mounting Plate Universal RAM POD I Single Leg Vehicle Base with 18" Long Leg and 2.5 Inch Round Plate with 1 Inch Dia. Ball
Price $98.99

Add
Price $45.49

Add
Price $33.49

Add
Price $44.49

Add
Triple 3.25" Dia. Suction Cup Base with Twist Lock, Standard Length "C" Sized Arm and 2.5" Dia. Adapter Plate (Heavy Duty) Single 3.25" Dia. Suction Cup Base with Twist Lock, Aluminum Standard Length Sized Arm and 2.5" Dia. Plate (Medium Duty) 2.5 Inch Diameter Base with Standard Sized Length Arm and 2.5 Inch Diameter Mounting Plate Universal RAM POD I Single Leg Vehicle Base with 18" Long Leg and 2.5 Inch Round Plate with 1 Inch Dia. Ball
Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter) with Standard Sized Arm and Universal Round Plate with 1.0 Inch Dia. Rubber Ball Handlebar Mount with Zinc U-Bolt (Fits .5 to 1.25 Dia.), Standard Sized Length Arm & 2.5 Inch Dia. Plate RAM-A-CAN Cup Holder Mount with Flexible Arm and ROUND Plate Universal 2.5 Inch Round Aluminum Plate with 1 Inch Dia. Rubber Ball (AMPS Hole Compatible)
Price $54.99

Add
Price $42.99

Add
Price $40.99

Add
Price $9.99

Add
Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter)  with Standard Sized Arm and Universal Round Plate with 1.0 Inch Dia. Rubber Ball Handlebar Mount with Zinc U-Bolt (Fits .5 to 1.25 Dia.), Standard Sized Length Arm & 2.5 Inch Dia. Plate RAM-A-CAN Cup Holder Mount with Flexible Arm and ROUND Plate Universal 2.5 Inch Round Aluminum Plate with 1 Inch Dia. Rubber Ball (AMPS Hole Compatible)


Browse for more products in the same category as this item:

Electronic Cradles & Holders > Samsung
Electronic Cradles & Holders > Tablets (Blackberry, Dell, HP, Lenovo, Motorola, Samsung, etc.)