Home > Lift Truck / Forklift Mounts > Lift Truck / Forklift Complete Assemblies (VESA & Scanner Gun Assemblies, etc.) > Heavy Duty "D" Ball Assemblies = 2.25" Ball Mounts / Max Weight 15 lbs. >

Back-Up Mounting Plate with Standard Sized "D" Length Arm and 3.68 Inch Round Plate with 2.25" Dia. D Sized Ball
Back-Up Mounting Plate with Standard Sized "D" Length Arm and 3.68 Inch Round Plate with 2.25" Dia. D Sized Ball


 
Price $222.05

STOCK STATUS: In Stock - Ships Next Bus. Day


Product Code: RAM-D-101-335
QTY:

DESCRIPTION
 
The RAM-D-101-335 is a lift truck back-up mounting plate that includes the mounting plate with 2.25 inch diameter rubber ball, standard sized "D" length arm and 3.68 inch diameter mounting plate with pre-drilled holes.

RAM-D-101-335 shown above.

NOTE: Mounting hardware to the forklift is not included.

RAM-D-101-335 Features and Options:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Forklift Mount Plate Material: The RAM-335 is black powder coated steel.
  • Forklift Plate Capacity: Maximum suggested weight 15 lbs.
  • Forklift Plate Description: RAM-335 shown below has many different combination of pre-drilled holes which will match many electronic devices.
NOTE: RAM-335 mounting plate show above with included RAM-D-246 plate with 3.68 inch diameter ball.
  • Manufacturer's Description: Sometimes the simplest solution makes the most sense. The new RAM Lift Truck Back-Up Mounting Plate is the ideal way to get a RAM ball attached to most any lift cage or overhead guard.
  • Installation: Installation is as easy as attaching the base with ball to one of the plates and then sandwiching the guard or cage between the two mounting plates using the hardware provided.
  • VESA Plate Included: RAM-D-246U is a black powder coated marine grade aluminum 4.75 inch square plate with 4x75mm and 4x100mm hole pattern. and 2.25 inch diameter rubber ball. The RAM-D-246 attaches to the RAM-335 forklift mounting plate.

  • Arm Included: RAM-D-201U shown below is the standard sized "D" sized length. Black powder coated marine grade aluminum arm is 6.5625 inches in length from socket center to socket center and 8.375 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!


  • Mounting Plate Included: RAM-D-202U is a marine grade aluminum universal is a 3.68 inch round marine grade aluminum universal plate with a 2.25 inch diameter rubber ball.



Browse for more products in the same category as this item:

Lift Truck / Forklift Mounts > Lift Truck / Forklift Complete Assemblies (VESA & Scanner Gun Assemblies, etc.) > Heavy Duty "D" Ball Assemblies = 2.25" Ball Mounts / Max Weight 15 lbs.