Home > Laptop Accessories > Printer Mounts for Brother, Cannon, Epson, HP, Intermec, Pentac, Zebra, etc > Printers by Make and Model > Fujitsu FP-1000 >

Quick Draw Printer System (Short Side Clamps) for Epson, Intermec & O'Neil Printers with Tough Claw
Quick Draw Printer System (Short Side Clamps) for Epson, Intermec & O'Neil Printers with Tough Claw


 
Alternative Views:


Price $95.99

STOCK STATUS: In Stock - Ships Next Bus. Day

Product Code: RAM-B-400U-C-VPR-104
Qty:

DESCRIPTION
 
The RAM-B-400U-C-VPR-104 Quick Draw printer cradle system is the perfect add-on to RAM laptop vehicle mounts. Included is the RAM-VPR-104 cradle, RAM-B-201U-C long length socket arm, RAM-B-202U adapter plate and RAP-B-400U tough claw.

Max weight capacity 2 lbs.

Tough Claw Clamp Range: .625" - 1.5" diameter and 0" - 1.14" flat surfaces.

Designed to fit the following models:
  • Epson TM-P60
  • Epson T88
  • Fujitsu FP-1000
  • Intermec PB2
  • Intermec PB3
  • Intermec PB20
  • Intermec PB21
  • Intermec PB22
  • Intermec PB40
  • Intermec PB41
  • Intermec PB42
  • O'Neil 2TE
  • O'Neil 4T
  • O'Neil 4TE
  • O'Neil 4TE with Card Reader
NOTE: This printer system will accommodate other printers with similar dimensions shown below in the technical drawing. Please call 224-578-9162 or complete the product inquiry form by clicking here if you have questions about your printer device.

Included Features:
  • Warranty: Manufacturer's, National Products Inc., life time warranty.
  • Material: Black powder coated marine grade aluminum.
  • Cradle Description: The RAM Quick Draw Jr. holders use a unique patent pending spring loaded mechanism that holds strong, yet provides easy removal for printer storage. At each end of the spring loaded cradle, RAM have designed a short side clamp plate that is designed to fit cleanly around either edge of the printer. This is the perfect accessory for the mobile professional who’s on the go. Light weight yet strong, these printer holders help get the job done.
  • Cradle Dimensions:
    • Min Width: 5.625 inches
    • Max Width: 10 inches
    • Height Clearance for Printer: 2.25 inches

  • NOTE: Please see the RAM-VPR-105 series if you need the Tall Side Clamps (11 Max Width to 3.125 Max Height).



Browse for more products in the same category as this item:

Laptop Accessories > Printer Mounts for Brother, Cannon, Epson, HP, Intermec, Pentac, Zebra, etc > Printers by Make and Model > Fujitsu FP-1000
Laptop Accessories > Printer Mounts for Brother, Cannon, Epson, HP, Intermec, Pentac, Zebra, etc > RAM-VPR-104-1
Laptop Accessories > Printer Mounts for Brother, Cannon, Epson, HP, Intermec, Pentac, Zebra, etc
Laptop Accessories > Printer Mounts for Brother, Cannon, Epson, HP, Intermec, Pentac, Zebra, etc > Printers by Make and Model > O'Neil 2TE, 4T, 4TE
Laptop Accessories > Printer Mounts for Brother, Cannon, Epson, HP, Intermec, Pentac, Zebra, etc > Printers by Make and Model > Intermec PB2, PB3
Laptop Accessories > Printer Mounts for Brother, Cannon, Epson, HP, Intermec, Pentac, Zebra, etc > Printers by Make and Model > Intermec PB20, PB21, PB22
Laptop Accessories > Printer Mounts for Brother, Cannon, Epson, HP, Intermec, Pentac, Zebra, etc > Printers by Make and Model > Intermec PB31, PB32
Laptop Accessories > Printer Mounts for Brother, Cannon, Epson, HP, Intermec, Pentac, Zebra, etc > Printers by Make and Model > Intermec PB40, PB41, PB42
Laptop Accessories > Printer Mounts for Brother, Cannon, Epson, HP, Intermec, Pentac, Zebra, etc > Printers by Make and Model > Intermec PB50, PB51
Laptop Accessories > Printer Mounts for Brother, Cannon, Epson, HP, Intermec, Pentac, Zebra, etc > Printers by Make and Model > Epson TM-P60
Laptop Accessories > Printer Mounts for Brother, Cannon, Epson, HP, Intermec, Pentac, Zebra, etc > Printers by Make and Model > Epson T88
Laptop Accessories > Printer Mounts for Brother, Cannon, Epson, HP, Intermec, Pentac, Zebra, etc > Printers by Make and Model > Canon Selphy CP730