Home >

Universal 18" Long Single Leg Mount with 1 Inch Socket and RAM-HOL-TAB-LGU LARGE Universal Tablet Cradle fits MOST 10" Screens WITH or WITHOUT Case/Cover/Skin Including: Apple iPad, iPad HD, Lenovo LePad, Moto XOOM, LG G-Slate, Samsung Galaxy, etc.
Universal 18" Long Single Leg Mount with 1 Inch Socket and RAM-HOL-TAB-LGU LARGE Universal Tablet Cradle fits MOST 10" Screens WITH or WITHOUT Case/Cover/Skin Including: Apple iPad, iPad HD, Lenovo LePad, Moto XOOM, LG G-Slate, Samsung Galaxy, etc.


 
Alternative Views:


Price $130.18

STOCK STATUS: In Stock - Ships Next Bus. Day

Product Code: RAM-B-316-1-TAB-LGU
QTY:

DESCRIPTION
 
The RAM-B-316-1-TAB-LGU is a 18 inch single leg pod (1 inch socket) mount and RAM-HOL-TAB-LGU universal LARGE tablet cradle holder. The RAM-HOL-TAB-LGU is a high strength composite spring loaded, quick release cradle with three sets of interchangeable cup ends, designed to fit MOST 10 inch screen tablets.

This table cradle is compatible, see full specs below, with the following devices:
  • Apple iPad & iPad 2
  • Apple iPad 3 / iPad HD
  • Asus EEE Pad
  • Asus Eee Pad Transformer
  • HP TouchPad
  • Lenovo LePad Slate
  • LG G-Slate
  • LG Optimus Pad
  • Motorola XOOM / XOOM 2
  • Pandigital R90A200
  • Samsung Galaxy 8.9
  • Samsung Galaxy 10.1
  • Most 10 inch screen tablets that maintain the dimensions below:
    • Height: 8.5" minimum to 10.75" maximum
    • Width: Maximum to 7.75"
    • Edge Depth: Maximum to 0.56"

    NOTE: As the manufacturer adds new models this cradle may fit additional models not listed above. Click here to see the latest information for the RAM-HOL-TAB-LGU cradle. Contact or email us byclicking here.

    NOTE: It's VERY IMPORTANT to verify the dimensions of your tablet with or without a sleeve/case when determining the overall size.

    NOTE: The RAM-316-1-TAB-LGU is also available and recommended. The RAM-316-1-TAB-LGU has a 1.5 inch socket system versus the 1.0 inch socket system found in the RAM-B-316-1-TAB-LGU. The 1.5 inch socket system has a higher weight rating (10 lbs versus 5 lbs) and provides extra durability for a minimal price difference.


    RAM-B-316-1-TAB-LGU shown above.

    RAM-B-316-1-TAB-LGU Includes the Following:
    • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
    • Base Description: Includes the RAM-B-316-1-238U. The length of the leg measures 18 inches long when measured at a right angle to the base of the foot. The flexible 18 inch long leg has a foot with a mounting hole. Simply place the hole into the passenger seat mounting bolt and adjust the mount to the required height with the flexible leg. The rigid flexible arm will hold everything you need safely and securely. The latest in the Mobile In-Car range from RAM. Click on the product link for additional information.
    • Socket Size: RAM "B" sized 1.0 inch ball socket system.
      • NOTE: The RAM-316-1-TAB-LGU is available. The RAM-316-1-TAB-LGU has a 1.5 inch socket system versus the 1.0 inch socket system found on the RAM-B-316-1-TAB-LGU. The 1.5 inch socket system has a higher weight rating (10 lbs versus 5 lbs) and provides extra durability for a minimal price difference.
    1. Support cups contain open slots to accommodate for devices with or without bumpers/cases sleeves.
    2. Back plate can support various size support cups.
    3. Spring loaded tension provides secure support of device.
    4. Spring loaded cradle allows for quick release of device.
    5. The cradle allows all cables (NOT INCLUDED) to stay connected and all buttons/ports remain accessible.
    • Cradle Dimensions with Large Cup Ends:
      • Height: 8.5" minimum to 10.75" maximum
      • Width: Maximum to 7.75"
      • Edge Depth: Maximum to 0.56"

    • Cradle Dimensions with Small Cup Ends:
      • Height: 8.25" minimum to 10.75" maximum
      • Width: Maximum to 6.8"
      • Edge Depth: Maximum to 0.50"

    • Included with Cradle:
      • (1) Spring loaded back plate
      • (2) Support cups for thin tablets
      • (2) Support cups for wide tablets
    • Manufacturer's Cradle Description: Get the most out of your tablet with the Universal Tab-Tite cradle. With 2 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the holder to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications.