Home > Aviation and Yoke Mounts > Aviation Assemblies (No Cradle) > Cessna & Misc Seat Rail Assemblies >

Cessna Aircraft Seat Rail Mount with 12 Inch Solid Arm and RAM-HOL-UN4U Univ. Finger Gripping Cradle (Fits Device Width 1.25" to 3.5" Including GPS, eTrex, 2 Way Radios, Smartphones with Cover/Case iPhone, Droid, etc.)
Cessna Aircraft Seat Rail Mount with 12 Inch Solid Arm and RAM-HOL-UN4U Univ. Finger Gripping Cradle (Fits Device Width 1.25" to 3.5" Including GPS, eTrex, 2 Way Radios, Smartphones with Cover/Case iPhone, Droid, etc.)


 
Price $201.49

STOCK STATUS: In Stock - Ships Next Bus. Day


Product Code: RAM-B-131-UN4
QTY:

DESCRIPTION
 
The RAM-B-131-UN4 is a Cessna seat rail base with 12 inch solid arm and universal finger gripping cradle (RAM-HOL-UN4U) for devices within the following dimensions:

NOTE: The RAM-HOL-UN4U includes 3 sets of different sized length arms.

Cradle Height Clamping Dimensions:
Minimum Height with Top and Bottom Plates: 5.25'' *
Maximum Height with Top and Bottom Plates: 6.0'' *
* The top and bottom plates can be removed for larger devices.

Spine/Back Plate Physical Dimensions: 2.5W x 5.0H''

Using Short Arm Side Clamps:
Maximum Depth: 0.75''
Minimum Width: 1.25''
Maximum Width: 3.0''

Using Medium Arm Side Clamps:
Maximum Depth: 1.25''
Minimum Width: 1.5''
Maximum Width: 3.5''

Using Long Arm Side Clamps:
Maximum Depth: 1.6''
Minimum Width: 2.25''
Maximum Width: 3.5''

NOTE: To see more information for the RAM-HOL-UN4U CLICK HERE.

RAM-HOL-UN4U Universal Finger Gripping Cradle shown below:
RAM-B-131-UN4 shown above.

NOTE: On the Cessna C150 model the seat may have to be removed to turn the knobs on the seat rail base.

RAM-B-131-UN4 Includes the Following:

  • NOTE: Manufacturer's specifications can change without notice.
  • NOTE: Click on the links below for a full part description.
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Color/Material: Black powder coated marine grade aluminum and steel.
  • Base: RAM-B-131BU has .25" and .50 inch NPT female threads.

  • Solid Arm: RAM-PA5412 12 inch solid arm with .25 inch male thread ends.
  • NPT Adapter: RAM-B-218-1U marine grade aluminum .25 inch NPT female threaded end with 1 inch diameter rubber ball.
  • Double Socket Arm: RAM-B-201U marine grade aluminum standard length sized arm. The arm length is 2.875 inches when measured from socket center to socket center. The total length of the arm is 3.6875 inches.
  • Adapter Plate: RAM-B-238U is a diamond shaped adapter with 1 inch diameter rubber ball. Two pre-drilled holes positioned 1.912 inches from center hole to center hole.
  • Manufacturer's RAM-HOL-UN4U Cradle Description: RAM universal Finger Grip holder for smartphones and cell phones. The holder comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount. Primary mounting applications for the Finger Grip holder is in HIGH VIBRATION environments including motorcycles, atv's, snowmobiles and bicycles. The bottom of the cradle has a plate that provides additional support to the electronic device being held.


Browse for more products in the same category as this item:

Aviation and Yoke Mounts > Aviation Assemblies (No Cradle) > Cessna & Misc Seat Rail Assemblies
Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Cessna Seat Rail RAM-B-131 Series Assemblies > Universal (iPhone, Smartphone, Netbook, Tablet, etc.) Assemblies
Smartphone Mounts > Universal Cell & Smartphone Assemblies by Device Width (Fits Width Range from .875" to 4.5") > UN4U Series Assemblies (1.25" to 3.5" Device Width)
All iPhones Except Plus Series (UN4U Finger Gripping Cradle) WORKS WITH Case/Cover/Skin