Home >

Aviation Yoke Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter) & RAM-HOL-UN9U Universal X-Grip Holder Fits Most 9-10" Tablets (Fits Device Width 6.25" to 8.1")
Aviation Yoke Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter) & RAM-HOL-UN9U Universal X-Grip Holder Fits Most 9-10" Tablets (Fits Device Width 6.25" to 8.1")


 
Alternative Views:


Price $146.99

STOCK STATUS: In Stock - Ships Next Bus. Day


Product Code: RAM-B-121-UN9U
QTY:

DESCRIPTION
 
The RAM-B-121-UN9U is a marine grade aluminum yoke mount that consists of the RAM-B-121-202U assembly (yoke clamp mount base, standard sized length arm, universal round plate) and RAM-HOL-UN9U X Grip III universal LARGE high strength composite spring loaded holder with expandable grip arms. Designed to fit MOST 10 inch screen tablets including the following devices:
  • Apple iPad Air
  • Apple iPad 2
  • Apple iPad 3
  • Apple iPad HD
  • Asus EEE Pad
  • Asus Eee Pad Transformer
  • HP TouchPad
  • Lenovo LePad Slate
  • LG G-Slate
  • LG Optimus Pad
  • Motorola XOOM
  • Motorola XOOM 2
  • Pandigital R90A200
  • Samsung Galaxy 10.1
  • Toshiba Thrive
  • Most 10 inch screen tablets that maintain the following dimensions below:
    • Minimum Width = 6.25 inches
    • Maximum Width = 8.1 inches
    • Depth = 0.875 inches

NOTE: As the manufacturer adds new models this cradle may fit additional models not listed above. Contact or email us by clicking here.

NOTE: It's VERY IMPORTANT to verify the dimensions of your tablet with or without a sleeve/case when determining the overall size.


RAM-B-121-UN9U shown above.

RAM-B-121-UN9U Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Color/Material: Black power coated marine grade aluminum.
  • Socket Ball Size: B-Ball Size = 1.0 inch Ball. Maximum suggested weight 5 lbs.
  • RAM-B-121-UN9U includes the RAM-B-121-202U (shown below). The RAM-B-121-202U consists of the RAM-B-121BU (accommodates a rail diameter from 0.625" to 1.25"), RAM-B-201U and RAM-B-202U.
    NOTE: Picture, far left, below shows a diamond plate adapter versus the included RAM-B-202U adapter for illustration purposes.
  • Included Base: RAM-B-121BU aluminum yoke clamp mount base fits a rail diameter from 5/8 inch to a maximum of 1.25 inches. The 1 inch rubber ball sits at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. To mount the base, simply place the yoke clamps around the rail and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes and unusual shaped motorbike rails. The rail does not need to be perfectly round to use this base.
  • Included Arm: RAM-B-201U black powder coated marine grade aluminum standard sized length arm for 1 inch balls.
    • Measures 2.875 inches between socket centers.
    • Measures 3.6875 inches in overall total length.
    • The arm allows for easy adjustment by loosening the plastic side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached base accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories.
  • Included Adapter: RAM-B-202U black powder coated marine grade aluminum 2.5 inch round plate with attached 1 inch diameter rubber ball.
    • Compatible with AMPS hole pattern. The adapter will connect to RAM cradles (RAM-HOL-xxxx series) and third party cradles with the AMPS hole pattern.
  • RAM-HOL-UN9U X Grip III Holder Features:
    • Spring loaded holder expands and contracts for perfect fit of your tablet.
    • Rubber coated tips will hold your tablet firm and stable.
    • Socket technology allows for multiple adjustment angles and articulation of your tablet.
    • Easy access grip knobs, located on the back of the holder for quick release of your tablet.
    • Multiple mounting access points on the back of the holder
    • Additional support keeper at the bottom of the holder.
    • Will not interfere with electronic ports, speakers and camera.
  • X Grip III Holder Dimensions:
    • Minimum Width = 6.25 inches
    • Maximum Width = 8.1 inches
    • Depth = 0.875 inches
  • Manufacturer's Description: The new RAM X-Grip III line of products just got bigger and better. This new model is just what you've been looking for to hold your favorite tablet. Just like the devices it was made for, it is everything you need and nothing you don't. Simple to open and close, the spring loaded RAM X-Grip III leaves the outside edge of your tablet almost completely free of annoying obstructions. Soft rubber fingers apply just enough force to keep your tablet in safe and secure. Compatible with a wide range of mounting solutions, your tablet is sure to find a home no matter where your travels take you.

The RAM-HOL-UN9U consists of a composite spring loaded holder, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN9U expands and contracts for perfect fit of most 10 inch tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip III.