Home > RAM Assemblies & Parts > B Ball = 1.0" Ball Assemblies & Parts / Max. Weight 5 lbs. > 1.0" B Ball Assemblies > Flat Surface Assemblies >

2.5" Dia. Base with 1" Dia. Rubber Ball, SHORT Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled Holes
2.5" Dia. Base with 1" Dia. Rubber Ball, SHORT Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled Holes


 
Alternative Views:


Price $37.99

STOCK STATUS: In Stock - Ships Next Bus. Day


Product Code: RAM-B-111U-A
QTY:

DESCRIPTION TECHNICAL SPECS PRODUCT OPTIONS
 
**CLICK HERE for the Latest Fish Finder & Chartplotter Compatibility Guide for this Mount.**

The RAM-B-111U-A is a 6.25 inch by 2 inch rectangular marine grade aluminum universal mounting plate with a 2.5 inch diameter base with 1 inch diameter rubber "B" sized ball and short length sized arm. The mounting plate can be used for many electronic devices including: CB Radios, HAM Radios, and Marine Electronics.

RAM-B-111U-A shown above.
Mounting hardware is not included.

RAM-B-111U-A Features:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Material: Black powder coated marine grade aluminum with plastic twist knob and two 1 inch diameter rubber balls.
  • NOTE: This marine grade aluminum plate can also be drilled into for a custom hole pattern without voiding the manufacturer's warranty.
  • Overall Height: 3.75 inches when fully extended.
  • Mounting Plate Dimensions: 6.25 inches * 2 inches with 1.0 inch diameter rubber "B" sized ball.
  • Socket Ball Size: Connects to 1.0 inch B Ball Size / Max. Weight 5 lbs.
  • Plate Description: RAM-B-111BU has many different combination of pre-drilled holes which will match many electronic devices including: CB Radios, Ham Radios, Marine GPS and other devices.


  • Base Plate Included: RAM-B-202U shown below is a marine grade aluminum universal 2.5 inch diameter plate with a 1.0 inch diameter rubber "B" sized ball. The plate has pre-drilled holes, including the universal AMPS hole pattern.

  • Arm Included: RAM-B-201U-A shown below is a short length marine grade aluminum arm 1.75 inches in length from socket center to socket center and 2.4375 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!

ACCESSORIES FOR THIS PRODUCT...
RAM Security Kit for 1 Inch Diameter "B" Sized Mounts and Gimbal Brackets 2.5" Dia. Base with 1" Dia. Rubber Ball, LONG Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled Holes RAM-ROD 2007 Fishing Rod Holder with Rectangle Flat Surface Base RAM-ROD 2000 Fishing Rod Holder with RAM-ROD Revolution Ratchet/Socket System and Round Flat Surface Base
Price $24.49

Add
Price $49.49

Add
Price $29.49

Add
Price $42.49

Add
RAM Security Kit for 1 Inch Diameter "B" Sized Mounts and Gimbal Brackets 2.5" Dia. Base with 1" Dia. Rubber Ball, LONG Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled Holes RAM-ROD 2007 Fishing Rod Holder with Rectangle Flat Surface Base RAM-ROD 2000 Fishing Rod Holder with RAM-ROD Revolution Ratchet/Socket System and Round Flat Surface Base
RAM-ROD 2000 RAIL MOUNT ADAPTER KIT Double Adapter Plate for Electronic Devices (Compatible with RAM-B-111BU and RAM-111BU) Aqua Box RAM-HOL-AQ6U Medium Wide Square Size Universal WATERPROOF Holder - Fits Device Up To 4"(W) X 6.0"(H) X 1.75"(D) 2.5" Dia. Base with 1" Dia. Rubber Ball, STANDARD Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled Holes
Price $9.99

Add
Price $15.49

Add
Price $62.99

Add
Price $30.00

Add
RAM-ROD 2000 RAIL MOUNT ADAPTER KIT Double Adapter Plate for Electronic Devices (Compatible with RAM-B-111BU and RAM-111BU) Aqua Box RAM-HOL-AQ6U Medium Wide Square Size Universal WATERPROOF Holder - Fits Device Up To 4"(W) X 6.0"(H) X 1.75"(D) 2.5" Dia. Base with 1" Dia. Rubber Ball, STANDARD Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled Holes
Double Socket Arm Keyed Lock for RAM-B-201 Series with 1/4"-20 Brass Hole
Price $29.49

Add
Double Socket Arm Keyed Lock for RAM-B-201 Series with 1/4"-20 Brass Hole


Browse for more products in the same category as this item:

RAM Assemblies & Parts > B Ball = 1.0" Ball Assemblies & Parts / Max. Weight 5 lbs. > 1.0" B Ball Assemblies > Flat Surface Assemblies
Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Assemblies (No Cradle)
Fishing & Paddlesport > Marine - Fish Finder and Chartplotter Assemblies (Garmin, Humminbird, Lowrance, Raymarine, etc.) > 1.0" B-Ball Sized Assemblies (5 Pound Max) > RAM-B-111 Series Assemblies