Home > RAM Assemblies & Parts > VESA Plates and Mounts > C Ball = 1.5" Ball VESA Mounts >

Standard Sized Length Arm and 75x75mm VESA Plate (RAM-2461U) and 100x100mm VESA Plate (RAM-246U)
Standard Sized Length Arm and 75x75mm VESA Plate (RAM-2461U) and 100x100mm VESA Plate (RAM-246U)


 
Alternative Views:


Price $70.49

STOCK STATUS: In Stock - Ships Next Bus. Day


Product Code: RAM-246-2461U
QTY:

DESCRIPTION
 
The RAM-246-2461U consists of a double socket arm, 3.625" square plate and 4.75" square plate. The 3.625" square plate contains a 75mm X 75mm VESA hole pattern. The 4.75" square plate contains a 4x100mm holes and 4x75mm hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. The mount height is 7.35 inches tall at maximum extension and is also collapsible.

RAM-246-2461U Features:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Material: Black powder coated marine grade aluminum. Rubber ball and socket help dampen vibration.
  • Socket Ball Size: Connects to 1.5 inch C Ball Size / Max. Weight 10 lbs.
  • Arm Included: RAM-201U shown below is a standard length marine grade aluminum arm 4.55 inches in length from socket center to socket center and 5.625 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!

  • VESA Plate Design: Two RAM-246U VESA plates with an 1.5 inch diameter ball connected to a 4.75 inch square plate. The plate consists of the 4 x 75mm/100mm VESA hole pattern. Each hole is 25mm in diameter. 
  • VESA Plate Design: Two RAM-2461U VESA plates with an 1.5 inch diameter ball conncted to a 3.68 inch square plate. The plate consists of the 4 x 75mm VESA hole pattern. Each hole is 25mm in diameter.


Browse for more products in the same category as this item:

RAM Assemblies & Parts > VESA Plates and Mounts > C Ball = 1.5" Ball VESA Mounts
RAM Assemblies & Parts > C Ball = 1.5" Ball Assemblies & Parts / Max. Weight 10 lbs. > 1.5" C Ball Assemblies
Flat Surface Mounts > C-Ball = 1.5" Ball Mounts & Parts / Max. Weight 10 lbs. > Flat Surface Assemblies