Home > Lift Truck / Forklift Mounts > Lift Truck / Forklift Complete Assemblies (VESA & Scanner Gun Assemblies, etc.) > Medium Duty "C" Ball Assemblies = 1.5" Ball Mounts / Max Weight 10 lbs. >

4 Inch Square Rail Clamp with Quick Draw Scanner Gun
4 Inch Square Rail Clamp with Quick Draw Scanner Gun


 
Price $112.85

STOCK STATUS: In Stock - Ships Next Bus. Day


Product Code: RAM-103-247U-4-QD1
QTY:

DESCRIPTION
 
The RAM-103-247U-4-QD1U is a marine grade aluminum square rail clamp base with a 1.5 inch diameter rubber ball. The rail clamp base will accommodate a 4 inch maximum rail width and includes the scanner holder. The RAM-103-247U-4-QD1U includes the RAM-247U-4 square rail clamp, RAM-201U arm, RAM-202U holder and RAM-HOL-QD1U scanner holder.

RAM-103-247U-4-QD1U shown above.

The
RAM-103-247U-4-QD1U Features and Options:
  • Warranty: Manufacturer's, National Products Inc., life time warranty.
  • Clamp Base Material: Black powder coated marine grade aluminum.
  • Clamp Base Ball Size: C ball sized 1.5 inch diameter rubber ball.
  • Clamp Base Description: RAM-247U-4 universal square rail clamp base that will accommodate a 4 inch maximum rail width. 
  • NOTE: Suggested Maximum Weight 10 pounds. See Clamp Base Ball Size Options below for additional heavier duty options.
  • Hardware Included: Yes. Two bolts and two nuts are included that will accommodate a square rail clamp distance up to 4 inches.
  • Holder Included: RAM-HOL-QD1U shown below is a universal quick draw holder works with practically every popular scanner in use.
     
  • Cradle Adapter Included: RAM-202U shown below is a universal 2.5 inch round plate with the AMPS hole pattern.
    
  • Arm Included: RAM-201U shown below is a standard length arm 4.55 inches from socket center to socket center. Overall length is 5.625 inches. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!
     
  • NOTE: The RAM-247U-4 rail clamp base is included. However, additional rail clamp base sizes are available and listed below.
  • Rail Clamp Base Size Options (Not Included):
    • RAM-247U-15 optional universal square rail clamp base will accommodate a 1.5 inch maximum rail width.
    • RAM-247U-17 optional universal square rail clamp base will accommodate a 1.7 inch maximum rail width.
    • RAM-247U-2 optional universal square rail clamp base will accommodate a 2 inch maximum rail width.
    • RAM-247U-25 optional universal square rail clamp base will accommodate a 2.5 inch maximum rail width.
    • RAM-247U-3 optional universal square rail clamp base will accommodate a 3 inch maximum rail width.
    • RAM-247U-5 optional universal square rail clamp base will accommodate a 5 inch maximum rail width.


Browse for more products in the same category as this item:

Lift Truck / Forklift Mounts > Lift Truck / Forklift Complete Assemblies (VESA & Scanner Gun Assemblies, etc.) > Medium Duty "C" Ball Assemblies = 1.5" Ball Mounts / Max Weight 10 lbs.