Home > Smartphone Mounts > Adhesive Universal Cell & Smartphone Assemblies >

2.5 Inch Adhesive Base with Composite SHORT Sized Arm and RAM-HOL-UN7BU Universal X Grip Spring Loaded Holder (Fits Device Width 1.875" to 3.25")
2.5 Inch Adhesive Base with Composite SHORT Sized Arm and RAM-HOL-UN7BU Universal X Grip Spring Loaded Holder (Fits Device Width 1.875" to 3.25")


 
Alternative Views:


Price $62.49

STOCK STATUS: In Stock - Ships Next Bus. Day


Product Code: RAP-B-378-A-UN7U
QTY:

DESCRIPTION
 
The RAP-B-378-A-UN7U is a 2.5 inch diameter adhesive disk base, SHORT sized plastic arm and composite universal spring loaded X grip holder. The holder (RAM-HOL-UN7BU) will fit devices, including iPhones, between the following dimensions:
  • Minimum Width = 0.875"
  • NOTE: Devices at 0.875" must be a minimum of 4" in height to fit into holder
  • Maximum Width = 3.25"
  • Depth = 0.875"
This holder is compatible, but not limited, to the following cases/skins/bumpers:

NOTE: Click here for more detailed information on the RAM-HOL-UN7BU. Please call 224-578-9162 or complete the product inquiry form by clicking here.

RAP-B-378-A-UN7U shown above.

RAP-B-378-A-UN7U Includes the Following:
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Included Base: RAP-B-378U 2.5 inch adhesive disk base with 1 inch diameter rubber ball. Put the base practically anywhere you want to keep your handheld device easy to see and always within your reach. Designed with a very small foot print, finding a home on your dash or console is easy.
  • Included Arm: RAP-B-201U-A composite short sized length arm measures approximately 2.0 inches between socket center to socket center and is 2.38 inches in total length. A tightening knob on the side of the arm enables the sockets to clamp firmly to a RAM 1 inch diameter ball. When loosening the side knob, you can pivot the ball and socket connections or completely disconnect the ball from the socket.
  • Included Holder: RAM-HOL-UN7BU
  • Holder Material: Black high strength composite with rubber tips.
    • Spring loaded holder expands and contracts for perfect fit of your devices.
    • 1 inch rubber diameter rubber ball connects to RAM "B" sized 1 inch socket parts.
    • Rubber coated tips will hold device firm and stable.
    • Single socket technology allows for multiple adjustment angles and articulation of device.
  • Manufacturer's Description: Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicles.
Instructions
  • General recommendations to properly adhere the adhesive disc.
    1. Ensure that both the dashboard surface and the bottom of the Ram Mount base have been thoroughly cleaned and dried.
    2. Attach either side of adhesive to the base first, let it sit several hours to allow adhesive to thoroughly bond.
    3. Attach other side of adhesive (with base) to the dashboard surface.
    4. Let the adhesive disc sit several hours before adding socket arm components, etc. to allow the adhesive to properly bond to the dashboard surface.

ACCESSORIES FOR THIS PRODUCT...
2.5 Inch Adhesive Base with 1 Inch Diameter Ball Universal X Grip Spring Loaded Holder with 1" B-Sized Ball (Fits Medium Sized Smartphones with Device Width from 1.875" to 3.25") COMPOSITE Double Socket Short Sized Length "A" Arm for 1 Inch Ball (2.38 Inches Overall Length) 1/4"-20 Male Aluminum Camera Stud with 1 Inch Rubber Ball
Price $15.99

Add
Price $33.99

Add
Price $9.99

Add
Price $10.99

Add
2.5 Inch Adhesive Base with 1 Inch Diameter Ball Universal X Grip Spring Loaded Holder with 1" B-Sized Ball (Fits Medium Sized Smartphones with Device Width from 1.875" to 3.25") COMPOSITE Double Socket Short Sized Length "A" Arm for 1 Inch Ball (2.38 Inches Overall Length) 1/4"-20 Male Aluminum Camera Stud with 1 Inch Rubber Ball
RAM-HOL-UN5U Universal Large Sized (Fits Device Width 1.75" to 3.5") Spring Loaded Clamping Holder with Rubber Bumpers (Fits Most Smartphones with Cover/Case iPhone, Droid, etc.) COMPOSITE Double Socket Standard Sized Length Arm for 1 Inch Ball (3.69 Inches Overall Length) Universal Aluminum Diamond Plate with 1 Inch Ball Dia. Rubber Ball (AMPS Hole Compatible) COMPOSITE Universal 2.5 Inch Round Plate with 1 Inch Ball and 1/4"-20 Male Camera Stud
Price $14.99

Add
Price $11.99

Add
Price $8.99

Add
Price $11.99

Add
RAM-HOL-UN5U Universal Large Sized (Fits Device Width 1.75" to 3.5") Spring Loaded Clamping Holder with Rubber Bumpers (Fits Most Smartphones with Cover/Case iPhone, Droid, etc.) COMPOSITE Double Socket Standard Sized Length Arm for 1 Inch Ball (3.69 Inches Overall Length) Universal Aluminum Diamond Plate with 1 Inch Ball Dia. Rubber Ball (AMPS Hole Compatible) COMPOSITE Universal 2.5 Inch Round Plate with 1 Inch Ball and 1/4"-20 Male Camera Stud


Browse for more products in the same category as this item:

Smartphone Mounts > Adhesive Universal Cell & Smartphone Assemblies
iPhone Adhesive Base Assemblies
iPod Touch Adhesive Base Assemblies
Smartphone Mounts > Universal Cell & Smartphone Assemblies by Device Width (Fits Width Range from .875" to 4.5") > UN7BU Series Assemblies (1.875" to 3.25" Device Width)
Adhesive Base Stick Mounts > RAP-B-378 (1 Inch Ball and Socket Arm) Assemblies with Cradle > Universal Assemblies