Home > Fishing & Paddlesport > Marine - Fish Finder and Chartplotter Assemblies (Garmin, Humminbird, Lowrance, Raymarine, etc.) > Rail & Strap Base & Tough-Claw Assemblies and Parts > 1.5" C-Ball Sized Assemblies and Parts (10 Pound Max) >

Trolling Motor Stabilizer - SMALL Universal Tough Claw (Fits .625 Inch to 1.5 Inch Round Diameter and 0 to 1.14 Inch Flat Surface) with 1.5 Inch Diameter Ball, Standard Sized Length Arm and 2.5 Inch Dia. Adapter Plate
Trolling Motor Stabilizer - SMALL Universal Tough Claw (Fits .625 Inch to 1.5 Inch Round Diameter and 0 to 1.14 Inch Flat Surface) with 1.5 Inch Diameter Ball, Standard Sized Length Arm and 2.5 Inch Dia. Adapter Plate


 
Alternative Views:


Price $80.99

STOCK STATUS: In Stock - Ships Next Bus. Day


Product Code: RAP-400-202U
QTY:

DESCRIPTION
 
The RAP-400-202U is a SMALL composite sized tough claw base mount base with 1.5 inch diameter rubber ball, marine grade aluminum arm and 2.5 inch diameter adapter. The tough claw will accommodate an outside round rail diameter from 0.625 to 1.5 inches and flat surface from 0 to 1.14 inches.

The maximum allowable distance between the mounting surface on the boat and the lowest point of the trolling motor shaft is 7.125”. Distances shorter than this are compatible.


RAP-400-202U shown above
.

RAP-400-202U Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Arm and Adapter Material: Black powder coated marine grade aluminum.
  • Arm and Adapter Size: C-Ball Size = 1.5 inch diameter RAM socket and ball.
  • Adapter Included: RAM-202U black powder coated marine grade aluminum plate with 1.5 inch diameter ball. Pre-drilled holes (AMPS hole compatible)
  • Arm Included: RAM-201U black powder coated marine grade aluminum standard length sized arm for RAM "C" sized arms. Fits 1.5 inch ball accessories.
  • Arm Dimensions:
    • Overall Length: 5.625 inches
    • Socket Center to Socket Center Distance: 4.55 inches
  • RAP-400U Tough Claw Color/Material: Black high strength composite with marine grade stainless steel components.
  • Tough Claw Clamping Range: Outside round rail diameter from 0.625" to 1.5" and flat surface from 0" to 1.14"
  • Tough Claw Physical Size:
    • Height: 4.81 inches
    • Width: 1.18 inches

  • RAP-400U Tough Claw Features:
    • High strength glass filled nylon construction with corrosion resistant stainless steel hardware
    • Rubber pads provide stable, even gripping and protection of mounting surface
    • Clamp jaw is configured for round, flat and odd shapes
    • 1.5" rubber ball is compatible with numerous RAM arms and mounts
    • Small, sleek form factor that accommodates for small, tight spaces
    • Quick engage and release of claw
  • Tough Claw Manufacturer's Description: The RAM Tough-Claw is the perfect mounting base for quick and easy tool-less installation and removal on round and square bars and rails. The Tough-Claw can be clamped on rails from 0.625" to 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM Tough-Claw will soon become another essential RAM component in your collection of mounting options.
  • RAM Tough Claw shown being installed below:


ACCESSORIES FOR THIS PRODUCT...
2.5 Inch Diameter Base with 1.5 Inch Rubber Ball and 1/4"-20 Male Aluminum Camera Stud RAM-HOL-UN11U Universal X-Grip Holder Fits Most 12" Tablets (Fits Device Width 7.25" to 8.75") COMPOSITE Double Socket SHORT Sized Length Arm for 1.5 Inch Ball (3.5 Inches in Overall Length) Double Socket Short Sized Length Arm for 1.5 Inch Ball (3.5 Inches in Overall Length)
Price $20.99

Add
Price $94.49

Add
Price $16.99

Add
Price $26.49

Add
2.5 Inch Diameter Base with 1.5 Inch Rubber Ball and 1/4"-20 Male Aluminum Camera Stud RAM-HOL-UN11U Universal X-Grip Holder Fits Most 12" Tablets (Fits Device Width 7.25" to 8.75") COMPOSITE Double Socket SHORT Sized Length Arm for 1.5 Inch Ball (3.5 Inches in Overall Length) Double Socket Short Sized Length Arm for 1.5 Inch Ball (3.5 Inches in Overall Length)
Double Socket Standard (Medium) Sized Length Arm for 1.5 Inch Ball (5.625 Inches in Overall Length) COMPOSITE Double Socket Standard Sized Length Arm for 1.5 Inch Ball (5.625 Inches in Overall Length) 2.5 Inch Diameter Aluminum Base with 1.5 Inch Dia. Ball SMALL Universal Tough Claw (Fits .625 Inch to 1.5 Inch Round Diameter and 0 to 1.14 Inch Flat Surface) with 1.5 Inch Diameter Ball
Price $28.99

Add
Price $22.49

Add
Price $16.49

Add
Price $41.99

Add
Double Socket Standard (Medium) Sized Length Arm for 1.5 Inch Ball (5.625 Inches in Overall Length) COMPOSITE Double Socket Standard Sized Length Arm for 1.5 Inch Ball (5.625 Inches in Overall Length) 2.5 Inch Diameter Aluminum Base with 1.5 Inch Dia. Ball SMALL Universal Tough Claw (Fits .625 Inch to 1.5 Inch Round Diameter and 0 to 1.14 Inch Flat Surface) with 1.5 Inch Diameter Ball
RAM-HOL-UN9U Universal X-Grip Holder Fits Most 9-10" Tablets (Fits Device Width 6.25" to 8.1")
Price $92.99

Add
RAM-HOL-UN9U Universal X-Grip Holder Fits Most 9-10" Tablets (Fits Device Width 6.25" to 8.1")


Browse for more products in the same category as this item:

Fishing & Paddlesport > Marine - Fish Finder and Chartplotter Assemblies (Garmin, Humminbird, Lowrance, Raymarine, etc.) > Rail & Strap Base & Tough-Claw Assemblies and Parts > 1.5" C-Ball Sized Assemblies and Parts (10 Pound Max)
RAM Assemblies & Parts > C Ball = 1.5" Ball Assemblies & Parts / Max. Weight 10 lbs. > 1.5" C Ball Assemblies