Home > Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Yoke Mount Assemblies (Fits .5" to 2.58" Rail Diameter) > Aluminum Yoke Assemblies RAM-B-121 Series Assemblies (Fits 0.625" to 1.25" Rail Diameter) > Universal Assemblies (iPhone, Smartphone, Netbook, Tablet, etc.) >

Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Dia.) with Std Sized Arm & RAM-HOL-TAB-LGU LARGE Universal Tablet Cradle fits MOST 10" Screens WITH or WITHOUT Case/Cover/Skin Including: Apple iPad, LePad, XOOM, LG G-Slate, Galaxy, etc
Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Dia.) with Std Sized Arm & RAM-HOL-TAB-LGU LARGE Universal Tablet Cradle fits MOST 10" Screens WITH or WITHOUT Case/Cover/Skin Including: Apple iPad, LePad, XOOM, LG G-Slate, Galaxy, etc


 
Price $90.79

STOCK STATUS: In Stock - Ships Next Bus. Day


Product Code: RAM-B-121-TAB-LGU
QTY:

DESCRIPTION
 
The RAM-B-121-TAB-LGU is a yoke base clamp mount (accommodates a rail diameter from 0.625" to 1.25"), marine grade aluminum standard sized length arm and RAM-HOL-TAB-LGU universal LARGE tablet cradle holder.  The RAM-HOL-TAB-LGU is a high strength composite spring loaded, quick release cradle with two sets of interchangeable cup ends, designed to fit MOST 10 inch screen tablets.

This table cradle is compatible, see full specs below, with the following devices:
  • Apple iPad & iPad 2
  • Apple iPad 3 / iPad HD
  • Asus EEE Pad
  • Asus Eee Pad Transformer
  • HP TouchPad
  • Lenovo LePad Slate
  • LG G-Slate
  • LG Optimus Pad
  • Motorola XOOM
  • Motorola XOOM 2
  • Pandigital R90A200
  • Samsung Galaxy 8.9
  • Samsung Galaxy 10.1
  • Most 10 inch screen tablets that maintain the dimensions below:
    • Height: 8.5" minimum to 10.75" maximum
    • Width: Maximum to 7.75" 
    • Edge Depth: Maximum to 0.56"

NOTE: As the manufacturer adds new units/models to the above series this cradle may fit additional models not listed above. Click here to see the latest cradle model information. Contact or email us by clicking here.

NOTE: It's VERY IMPORTANT to verify the dimensions of your tablet with or without a sleeve/case when determining the overall size.

RAM-B-121-TAB-LGU shown above. Electronic device not included.
RAM-B-121-TAB-LGU Includes the Following:
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Yoke Mount Description: Includes RAM-B-121-238U. This aviation yoke mount includes the marine grade aluminum yoke base (accommodates a rail diameter from 0.625" to 1.25") with 1 inch rubber ball, standard sized length arm and diamond shaped adapter plate with 1 inch rubber ball. For additional information please click on the product link above.
  • Cradle Material: Black high strength composite. 
  • Cradle Hole Pattern: The back of the cradle has two pre-drilled holes compatible with the AMPS hole pattern (1.912 inches from center hole to center hole). 
  1. Support cups contain open slots to accommodate for devices with or without bumpers/cases sleeves.
  2. Back plate can support various size support cups.
  3. Spring loaded tension provides secure support of device.
  4. Spring loaded cradle allows for quick release of device.
  5. The cradle allows all cables (NOT INCLUDED) to stay connected and all buttons/ports remain accessible.
  • Cradle Dimensions with Large Cup Ends:
    • Height: 8.5" minimum to 10.75" maximum
    • Width: Maximum to 7.75"
    • Edge Depth: Maximum to 0.56"
  • Cradle Dimensions with Small Cup Ends:
    • Height: 8.25" minimum to 10.75" maximum
    • Width: Maximum to 6.8"
    • Edge Depth: Maximum to 0.50"
  • Included with Cradle:
    • (1) Spring loaded back plate
    • (2) Support cups for thin tablets
    • (2) Support cups for wide tablets
  • Manufacturer's Cradle Description: Get the most out of your tablet with the Universal Tab-Tite cradle. With 2 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the holder to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications.


Browse for more products in the same category as this item:

Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Yoke Mount Assemblies (Fits .5" to 2.58" Rail Diameter) > Aluminum Yoke Assemblies RAM-B-121 Series Assemblies (Fits 0.625" to 1.25" Rail Diameter) > Universal Assemblies (iPhone, Smartphone, Netbook, Tablet, etc.)