Home > Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Yoke Mount Assemblies (Fits .5" to 2.58" Rail Diameter) > Aluminum Yoke Assemblies RAM-B-121 Series Assemblies (Fits 0.625" to 1.25" Rail Diameter) > Garmin Assemblies >

Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter) with Standard Sized Arm and Garmin RAM-HOL-GA14U Holder (Selected GPSMAP 76(C,CS,CSX) and 96(C) Series)
Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter) with Standard Sized Arm and Garmin RAM-HOL-GA14U Holder (Selected GPSMAP 76(C,CS,CSX) and 96(C) Series)


 
Price $65.99

STOCK STATUS: In Stock - Ships Next Bus. Day


Product Code: RAM-B-121-GA14U
QTY:

DESCRIPTION
 
The RAM-B-121-GA14U is a marine grade aluminum yoke mount that consists of the RAM-B-121-238U assembly (yoke clamp mount base, standard sized length arm, universal diamond plate) and electronics holder for the following Garmin models:
  • Garmin GPSMAP 76C
  • Garmin GPSMAP 76CS
  • Garmin GPSMAP 76Cx
  • Garmin GPSMAP 76CSx
  • Garmin GPSMAP 96
  • Garmin GPSMAP 96C

NOTE: As the manufacturer adds new units/models to the above series this cradle may fit additional models not listed above. Click here for the most current model information RAM-HOL-GA14U. Please call 224-578-9162 or complete the product inquiry form by clicking here.



RAM-B-121-GA14U shown above

 

RAM-B-121-GA14U Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Color/Material: Black powder coated marine grade aluminum. 
  • Socket Ball Size: B-Ball Size = 1.0 inch Ball. Maximum suggested weight 5 lbs.
  • RAM-B-121-GA14U includes the RAM-B-121-238U (shown below). The RAM-B-121-238U consists of the RAM-B-121BU, RAM-B-201U and RAM-B-238U.

  • Yoke Base: RAM-B-121BU aluminum yoke clamp mount base fits a rail diameter from 5/8 inch to a maximum of 1.25 inches. The 1 inch rubber ball sits at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. To mount the base, simply place the yoke clamps around the rail and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes and unusual shaped motorbike rails. The rail does not need to be perfectly round to use this base.
  • Arm: RAM-B-201U standard sized length arm for 1 inch balls. The arm measures 2.875 inches between socket centers (3.6875 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction. 
  • Adapter: RAM-B-238U universal diamond plate with two holes measuring 1.9 inches from hole center to hole center and accommodates the AMPS hole pattern.
  • Cradle: RAM-HOL-GA14U high strength plastic holder is included. Place the top of the GPS unit into the cradle, and then push the base into the expandable arms at the bottom of the holder. The arms will then snap into place when the GPS is completely secured in the cradle. The cradle allows all cables (NOT INCLUDED) to stay connected while the GPS unit is in the cradle.
  • Cradle/Holders/: OPTIONAL. Select a holder for Apple, cell phones, GPS systems and electronic devices by clicking here.


Browse for more products in the same category as this item:

Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Yoke Mount Assemblies (Fits .5" to 2.58" Rail Diameter) > Aluminum Yoke Assemblies RAM-B-121 Series Assemblies (Fits 0.625" to 1.25" Rail Diameter) > Garmin Assemblies