Home > RAM Assemblies & Parts > B Ball = 1.0" Ball Assemblies & Parts / Max. Weight 5 lbs. > 1.0" B Ball Assemblies > Misc. Assemblies >

Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter) with Standard Sized Arm and Universal Diamond Plate with 1.0 Inch Dia. Rubber Ball
Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter) with Standard Sized Arm and Universal Diamond Plate with 1.0 Inch Dia. Rubber Ball


 
Price $53.99

STOCK STATUS: In Stock - Ships Next Bus. Day


Product Code: RAM-B-121-238U
QTY:

DESCRIPTION
 
The RAM-B-121-238U is a marine grade aluminum yoke mount that consists of the a yoke clamp mount base, standard sized length arm and universal diamond plate. This mount DOES NOT INCLUDE a cradle or holder. See below for cradle and holder options.



RAM-B-121-238U shown above

RAM-B-121-238U Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Color/Material: Black powder coated marine grade aluminum. 
  • Socket Ball Size: B-Ball Size = 1.0 inch Ball. Maximum suggested weight 5 lbs. 
  • Yoke Base: RAM-B-121BU aluminum yoke clamp mount base fits a rail diameter from 5/8 inch(0.625") to a maximum of 1.25 inches. The 1 inch rubber ball sits at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. To mount the base, simply place the yoke clamps around the rail and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes and unusual shaped motorbike rails. The rail does not need to be perfectly round to use this base.
  • Arm: RAM-B-201U standard sized length arm for 1 inch balls. The arm measures 2.875 inches between socket centers (3.6875 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction. 
  • Adapter: RAM-B-238U universal diamond plate with two holes measuring 1.9 inches from hole center to hole center and accommodates the AMPS hole pattern.
  • Hardware Included: No. Mounting hardware is not included. Most cradles and holders include mounting hardware to attach to the RAM-B-238U.
  • Cradle/Holders/Aqua Box:Optional. Select a holder for Apple, cell phones, GPS systems and electronic devices by clicking here.

RAM-B-201U Description: Black powder coated marine grade aluminum arm allows a 1 inch diameter ball accessory to be connected at either end. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached accessories. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories.

RAM-B-238U Description: Black powder coated marine grade aluminum universal diamond plate measures 1.25 inches * 2.5 inches. This diamond plate connects to a 1 inch diameter rubber ball. The diamond plate has two holes positioned 1.9 inches from center to center. The hole pattern found on the diamond plate will connect to a large variety of third party cradles and mounts (including RAM holders RAM-HOL-xxxx) and including those with the industry standard AMPS hole pattern.


RAM-B-121-238U Options (Not Included) Below:

RAM-B-238U Options (Not Included): RAP-326 shown below is a quick release adapter that allows fast removal from the RAM-B-238U without tools. The RAP-326 combined with the RAP-326MU with the allows your electronic device to be disconnected from one application and shared with another mounting device that is also using the RAM-B-238U.


RAM-B-238U Options (Not Included): The RAM-MAG-1U shown below is a screen magnifier that is 2 inches by 4 inches with a 2x zoom.


RAM-B-121-238U shown below with optional GPS holder (Not Included).
 

ACCESSORIES FOR THIS PRODUCT...
Universal Finger Gripping Cradle (Fits Device Width 1.25" to 3.5" Including GPS, eTrex, 2 Way Radios, Smartphones with Cover/Case iPhone, Droid, etc.) Double Socket Standard (Medium) Length Sized Arm for 1 Inch Ball (3.69 Inches Overall Length) Easy Mount Quick Release Adapter Set for RAM-B-238 and RAM Holders Universal Top Clamping Quick Phone Cradle (Fits Device Height Range: 4.75" - 5.75", Width Range: 2.19" - 3.25", Max Depth: 0.72")
Price $34.99

Add
Price $18.99

Add
Price $9.49

Add
Price $17.99

Add
Universal Finger Gripping Cradle (Fits Device Width 1.25" to 3.5" Including GPS, eTrex, 2 Way Radios, Smartphones with Cover/Case iPhone, Droid, etc.) Double Socket Standard (Medium) Length Sized Arm for 1 Inch Ball (3.69 Inches Overall Length) Easy Mount Quick Release Adapter Set for RAM-B-238 and RAM Holders Universal Top Clamping Quick Phone Cradle (Fits Device Height Range: 4.75" - 5.75", Width Range: 2.19" - 3.25", Max Depth: 0.72")


Browse for more products in the same category as this item:

RAM Assemblies & Parts > B Ball = 1.0" Ball Assemblies & Parts / Max. Weight 5 lbs. > 1.0" B Ball Assemblies > Misc. Assemblies
Popular GPS Mounts (No Cradle)
Aviation and Yoke Mounts > Aviation Assemblies (No Cradle) > Yoke Assemblies
Apple Compatible Mounting Assemblies (No Cradle) > Golf Cart and Pull Cart Specific Assemblies
Apple Compatible Mounting Assemblies (No Cradle) > Aviation Specific Assemblies