Home > Fishing & Paddlesport > Marine - Fish Finder and Chartplotter Assemblies (Garmin, Humminbird, Lowrance, Raymarine, etc.) > Rail & Strap Base & Tough-Claw Assemblies and Parts > 1.5" C-Ball Sized Assemblies and Parts (10 Pound Max) >

Large Strap Base, Standard Sized Length Arm and Universal Round Plate with 1.5 Inch Dia. Ball (Fits 4 Inch to 6 Inch Rail Diameter)
Large Strap Base, Standard Sized Length Arm and Universal Round Plate with 1.5 Inch Dia. Ball (Fits 4 Inch to 6 Inch Rail Diameter)


 
Price $76.49

STOCK STATUS: In Stock - Ships Next Bus. Day


Product Code: RAM-118U
QTY:

DESCRIPTION
 
The RAM-118U is a marine grade aluminum large strap rail mount (accommodates rail from 4 to 6 inches) with a standard sized  length arm and universal round plate with AMPS hole pattern.

NOTE: This mount was originally designed to strap to a lantern base, but can also be used to strap to a large rail.

RAM-118U shown above.

RAM-118U Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Material: Black powder coated marine grade aluminum.
  • Ball Size: C ball sized 1.5 inch diameter rubber ball. Maximum weight 10 lbs.
  • Base Included: RAM-118BU black powder coated marine grade aluminum large strap base with 1.5 diameter rubber ball and metal strap. The metal strap included will accommodate a large rail diameter from 4 inch to 6 inches. 
  • Arm Included: RAM-201U shown below is the standard length double socket arm that measures 4.55 inches between socket centers and 5.625 inches in overall length. The arm is black powder coated marine grade aluminum with a plastic twist knob and accepts 1.5 inch diameter balls. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached accessories. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!
   
  • Plate Included: RAM-202U shown below is a universal 2.5 inch diameter round plate with pre-drilled holes that can be used to connect to a large variety of third party cradles and holders (RAM Mounts plastic holders and aqua boxes, i.e. RAM-HOL-xxxx) including those with the industry standard AMPS hole pattern. The plate is black powder coated marine grade aluminum with a 1.5 inch diameter rubber ball.
   


ACCESSORIES FOR THIS PRODUCT...
Aqua Box RAM-HOL-AQ3U WATERPROOF Small Size Holder - Fits Device Up To 2.38"(W) X 4.63"(H) X 1.13"(D) Aqua Box RAM-HOL-AQ6U Medium Wide Square Size Universal WATERPROOF Holder - Fits Device Up To 4"(W) X 6.0"(H) X 1.75"(D) Aqua Box RAM-HOL-AQ2U WATERPROOF Medium Size Holder - Fits Device Up To 2.88"(W) X 5.75"(H) X 1.188"(D) Aqua Box RAM-HOL-AQ1U WATERPROOF Large Size Holder - Fits Device Up To 3.5"(W) X 8.43"(H) X 2.25"(D)
Price $36.49

Add
Price $62.99

Add
Price $43.49

Add
Price $64.99

Add
Aqua Box RAM-HOL-AQ3U WATERPROOF Small Size Holder - Fits Device Up To 2.38"(W) X 4.63"(H) X 1.13"(D) Aqua Box RAM-HOL-AQ6U Medium Wide Square Size Universal WATERPROOF Holder - Fits Device Up To 4"(W) X 6.0"(H) X 1.75"(D) Aqua Box RAM-HOL-AQ2U WATERPROOF Medium Size Holder - Fits Device Up To 2.88"(W) X 5.75"(H) X 1.188"(D) Aqua Box RAM-HOL-AQ1U WATERPROOF Large Size Holder - Fits Device Up To 3.5"(W) X 8.43"(H) X 2.25"(D)
Double Socket Arm Keyed Lock for RAM-201 Series with 1/4"-20 Brass Hole
Price $31.99

Add
Double Socket Arm Keyed Lock for RAM-201 Series with 1/4"-20 Brass Hole


Browse for more products in the same category as this item:

Fishing & Paddlesport > Marine - Fish Finder and Chartplotter Assemblies (Garmin, Humminbird, Lowrance, Raymarine, etc.) > Rail & Strap Base & Tough-Claw Assemblies and Parts > 1.5" C-Ball Sized Assemblies and Parts (10 Pound Max)