Home > iPhone Adhesive Base Assemblies >

Universal 2.5 Inch Adhesive Base with RAM-HOL-AP11U Apple iPhone 5 Holder (Fits iPhone 5/5S WITHOUT Case or Cover)
Universal 2.5 Inch Adhesive Base with RAM-HOL-AP11U Apple iPhone 5 Holder (Fits iPhone 5/5S WITHOUT Case or Cover)


 

STOCK STATUS: Out of Stock - Email for ETA


Product Code: RAP-SB-180-AP11U
QTY:

DESCRIPTION
 
The RAP-SB-180-AP11U is a simple and attractive adhesive base mount designed for the following Apple models:
  • Apple iPhone 5, 5S

NOTE: As the manufacturer adds new units/models to the above series this cradle may fit additional models not listed above. Click here for the most current model information RAM-HOL-AP11U. Please call 224-578-9162 or complete the product inquiry form by clicking here.


RAP-SB-180-AP11U shown above.

RAP-SB-180-AP11U Includes the Following:
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Base: 2.5 inch adhesive disk base. 
  • Arm: Composite arm that attaches to the adhesive disk base.
  • Adapter: Composite black powder coated universal diamond plate. Two holes measuring 1.9 inches from center to center is compatible with the AMPS hole pattern and any RAM Mount holder. This mount rotates 180 degrees. 
  • Cradle: RAM-HOL-AP11U high strength plastic holder. Place the top of the iPhone into the cradle, and then push the base into the expandable arms at the bottom of the holder. The arms will then snap into place when the iPhone is completely secured in the cradle. The cradle allows all cables (not included) to stay connected while the iPhone is in the cradle.
  • Manufacturer's Description: Minimalists in design yet incredibly useful is the RAM Lil' Buddy mount. Using an adhesive disk, put the Lil' Buddy practically anywhere you want to keep your portable electronics easy to see and always within your reach. Designed with a very small foot print, finding a home on your dash or console is easy.
 
Alternative Mounts that fit the iPhone 5 WITH or WITHOUT a Case or Sleeve:
Click here, to view X-Grip cradle for the Apple iPhone 5, 5S
Click here, to view Top Clamping cradle for Apple iPhone 5, 5S
Click here, to view Finger Gripping holder for Apple iPhone 5, 5S
Click here, to view AQUA-BOX Pro Water Resistant Case for the iPhone 5, 5S
Instructions
  • General recommendations to properly adhere the adhesive disc.
    1. Ensure that both the dashboard surface and the bottom of the Ram Mount base have been thoroughly cleaned and dried.
    2. Attach either side of adhesive to the base first, let it sit several hours to allow adhesive to thoroughly bond.
    3. Attach other side of adhesive (with base) to the dashboard surface.
    4. Let the adhesive disc sit several hours before adding socket arm components, etc. to allow the adhesive to properly bond to the dashboard surface.


Browse for more products in the same category as this item:

iPhone Adhesive Base Assemblies