Home > Suction & Adhesive Mounts > Adhesive Base (Peel & Stick) Assemblies (Garmin, GPS, Smartphone, Universal, etc.) > RAP-SB-178 (Snap Link Arm) Assemblies with Cradle > Universal Assemblies >

  2.5 Inch Adhesive Flex Stick Base with RAM-HOL-UN4U Univ. Finger Gripping Cradle (Fits Device Width 1.25" to 3.5" Including GPS, eTrex, 2 Way Radios, Smartphones with Cover/Case iPhone, Droid, etc.)
 
 
Price $33.65


STOCK STATUS:In Stock

AVAILABILITY: Ships within 24 Hours
Product Code: RAP-SB-178-UN4U
Qty:

DESCRIPTION
 
The RAP-SB-178-UN4U is a simple and attractive design that offers a semi-permanent mounting solution with a universal finger grip holder.


RAP-SB-178-UN4U shown above.

RAP-SB-178-UN4U Includes the Following:
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Base Description: The base includes a 2.5 inch RAM-202PSA 3M semi-permanent adhesive disk pad that attaches firmly to a flat surface. 
  • Arm: Flexible snap link arm that allows the ultimate in versatility.
  • Adapter: Composite black powder coated universal diamond plate. Two holes measuring 1.9 inches from center to center is compatible with the AMPS hole pattern and any RAM Mount holder (RAM-HOL-xxxx) for future mounting options.
  • Cradle Included: Includes RAM-HOL-UN4U high strength plastic finger grip cradle is designed to hold a large amount of different kinds of cell phones (Blackberry and iPhone, etc.) and electronic devices such as GPS (Garmin E-trex, Nuvi) and MP3 players. This is a popular holder for ATVs and motorcycles. The RAM-HOL-UN4U has four rubber coated finger placed along the side of the cradle that grips any electrical device you need to hold.  The bottom of the cradle has a plate that provides additional support to the electronic device being held.
  • Cradle Dimensions: Below are the dimensions the RAM-HOL-UN4U holder will accommodate:
RAM-HOL-UN4U Cradle Height Dimensions:
Minimum with Top and Bottom Plates: 5.25'' *
Maximum with Top and Bottom Plates: 6.0'' *

* The top and bottom plates can be removed for larger devices.

Spine Plate Dimensions: 2.5W x 5.0H''
Using Short Arm Side Clamps Maximum Depth: 0.75''
Minimum Width: 1.25''
Maximum Width: 3.0''

Using Medium Arm Side Clamps
Maximum Depth: 1.25''
Minimum Width: 1.5''
Maximum Width: 3.5''

Using Long Arm Side Clamps
Maximum Depth: 1.6''
Minimum Width: 2.25''
Maximum Width: 3.5''


Accessories for this product...
RAP-SB-192 RAM-202PSAU
Price $8.05
Add
Price $4.50
Add


Browse for more products in the same category as this item:

Suction & Adhesive Mounts > Adhesive Base (Peel & Stick) Assemblies (Garmin, GPS, Smartphone, Universal, etc.) > RAP-SB-178 (Snap Link Arm) Assemblies with Cradle > Universal Assemblies
Cell / Smartphone Mounts > Adhesive Universal Cell & Smartphone Assemblies
Suction & Adhesive Mounts > Adhesive Base (Peel & Stick) Assemblies (Garmin, GPS, Smartphone, Universal, etc.) > RAP-SB-178 (Snap Link Arm) Assemblies with Cradle > Apple Assemblies
Suction & Adhesive Mounts > Adhesive Base (Peel & Stick) Assemblies (Garmin, GPS, Smartphone, Universal, etc.) > RAP-SB-178 (Snap Link Arm) Assemblies with Cradle > Smartphone Assemblies
Suction & Adhesive Mounts > Apple Adhesive Base (Peel & Stick) Assemblies and Cradles > iPhone Adhesive Base Assemblies
Suction & Adhesive Mounts > Apple Adhesive Base (Peel & Stick) Assemblies and Cradles > iPod Touch Adhesive Base Assemblies
Cell / Smartphone Mounts > Universal Cell & Smartphone Assemblies by Device Width (Fits Width Range from .875" to 3.5") > UN4U Series Assemblies (1.25" to 3.5" Device Width)
Apple Mounts and Cradles > Apple Complete Assemblies with Cradle by Device Type (i.e., iPad, iPhone, iPod, etc.) > iPhone Assemblies with Cradle > All iPhones (UN4U Finger Gripping Cradle) WORKS WITH Case/Cover/Skin


Handlebar Mount with Zinc U-Bolt (Fits .5 to 1.25 Dia.), Standard Sized Length Arm & RAM-HOL-AQ3U Small Size WATEPROOF Holder $53.15
Universal Horizontal Laptop Mount with Single Swing Arm $115.95
Brake/Clutch Assembly Mount or U-Bolt Handlebar Mount with Short Sized Arm and Diamond Plate $31.20
Freightliner, International, Kenworth, Peterbilt, and Volvo Commercial VESA Mount System for Glacier Computing & Routeware $218.95
8 Inch Male and 9 Inch Female Tele-Pole with Articulating Arm (No RAM-202U) $85.95
Handlebar Mount with Zinc U-Bolt (Fits .5 to 1.25 Dia.), Standard Sized Length Arm & RAM-HOL-AQ2U Medium Size WATERPROOF Holder $56.26
RAM-A-Can with 6" Flexible Arm and Garmin RAM-HOL-GA26U Holder (Selected nuvi 700 Series) $35.30
1 Inch Filler Face Plate $5.20
Universal Vertical DRILL Down Base (Requires Flat and Level Surface) Laptop Mount System $189.95 + Free Shipping and Laptop Accessory!