Home > Adhesive Base Stick Mounts > RAP-SB-178 (.75 Inch Snap Link Ball and Socket Arm) Assemblies with Cradle > Apple Assemblies >

Universal 2.5 Inch Adhesive Flex Stick Base with RAM-HOL-PD3U Universal Top Clamping Cradle (Fits Device Width 2.25" to 3.5" Including Most Smartphones with Cover/Case iPhone, Droid, etc.)
Universal 2.5 Inch Adhesive Flex Stick Base with RAM-HOL-PD3U Universal Top Clamping Cradle (Fits Device Width 2.25" to 3.5" Including Most Smartphones with Cover/Case iPhone, Droid, etc.)


 

STOCK STATUS: Out of Stock - Email for ETA


Product Code: RAP-SB-178-PD3U
QTY:

DESCRIPTION
 
The RAP-SB-178-PD3U is a simple and attractive design that offers a semi-permanent mounting solution with a universal electronic device top gripping cradle. The cradle will fit devices, such as smartphones, within the following dimensions:

CRADLE CLAMPING DIMENSIONS:
Height Range: 4.75 inches - 6.25 inches
Width Range: 2.25 inches - 3.25 inches



RAP-SB-178-PD3U shown above.

RAP-SB-178-PD3U Includes the Following:
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Base Description: The base includes a 2.5 inch RAM-202PSA 3M semi-permanent adhesive disk pad that attaches firmly to a flat surface. 
  • Arm: Flexible snap link arm that allows the ultimate in versatility.
  • Adapter: Composite black powder coated universal diamond plate. Two holes measuring 1.9 inches from center to center is compatible with the AMPS hole pattern and any RAM Mount holder (RAM-HOL-xxxx) for future mounting options.
  • Cradle Included: RAM-HOL-PD3U is a spring loaded top clamping cradle that expands top to bottom to hold electronic devices securely. Four clamp pins are supplied; these can be positioned to suit the width and shape of electronic devices such as smartphones. Below are the dimensions the cradle will accommodate.
    CRADLE CLAMPING DIMENSIONS:
    Height Range: 4.75 inches - 6.25 inches
    Width Range: 2.25 inches - 3.25 inches
Instructions
  • General recommendations to properly adhere the adhesive disc.
    1. Ensure that both the dashboard surface and the bottom of the Ram Mount base have been thoroughly cleaned and dried.
    2. Attach either side of adhesive to the base first, let it sit several hours to allow adhesive to thoroughly bond.
    3. Attach other side of adhesive (with base) to the dashboard surface.
    4. Let the adhesive disc sit several hours before adding socket arm components, etc. to allow the adhesive to properly bond to the dashboard surface.

ACCESSORIES FOR THIS PRODUCT...
Apple iPhone RAM-HOL-AP3U Cradle for 1st Generation (Non 3G) WITHOUT Case or Cover Universal 2.5 Inch Adhesive Flex Stick Base with Snap Link Mount Universal Finger Gripping Cradle (Fits Device Width 1.25" to 3.5" Including GPS, eTrex, 2 Way Radios, Smartphones with Cover/Case iPhone, Droid, etc.) Universal Small Sized Electronic Device Holder (Fits Device Width 1.5" to 2.5")
Price $10.99

Add
Price $21.49

Add
Price $34.99

Add
Price $24.49

Add
Apple iPhone RAM-HOL-AP3U Cradle for 1st Generation (Non 3G) WITHOUT Case or Cover Universal 2.5 Inch Adhesive Flex Stick Base with Snap Link Mount Universal Finger Gripping Cradle (Fits Device Width 1.25" to 3.5" Including GPS, eTrex, 2 Way Radios, Smartphones with Cover/Case iPhone, Droid, etc.) Universal Small Sized Electronic Device Holder (Fits Device Width 1.5" to 2.5")
Apple iPod Nano RAM-HOL-AP5U Cradle for iPod Nano (3rd Generation WITHOUT Case or Cover) Easy Mount Quick Release Adapter Set for RAM-B-238 and RAM Holders
Price $13.49

Add
Price $9.49

Add
Apple iPod Nano RAM-HOL-AP5U Cradle for iPod Nano (3rd Generation WITHOUT Case or Cover) Easy Mount Quick Release Adapter Set for RAM-B-238 and RAM Holders


Browse for more products in the same category as this item:

Adhesive Base Stick Mounts > RAP-SB-178 (.75 Inch Snap Link Ball and Socket Arm) Assemblies with Cradle > Apple Assemblies
Adhesive Base Stick Mounts > RAP-SB-178 (.75 Inch Snap Link Ball and Socket Arm) Assemblies with Cradle > Universal Assemblies
Adhesive Base Stick Mounts > RAP-SB-178 (.75 Inch Snap Link Ball and Socket Arm) Assemblies with Cradle > Smartphone Assemblies
iPhone Adhesive Base Assemblies
iPod Touch Adhesive Base Assemblies
Smartphone Mounts > Universal Cell & Smartphone Assemblies by Device Width (Fits Width Range from .875" to 4.5") > PD3U Series Assemblies (2.25" to 3.25" Device Width)
All iPhones Except Plus Series (PD3U Top Clamping Cradle) WORKS WITH Case/Cover/Skin