RAP-B-378-GA54U RAM Mount 2.5" Dia. Adhesive Base Mount for Selected Garmin dezl 760LMT Series

VEHICLE LAPTOP MOUNTS

.

Product Request
Contact Us

CLICK HERE to email for product information or a price request.

RAM Mount Help 101

CLICK HERE for RAM sizing guide and naming convention help.

Home > Adhesive Base Stick Mounts > RAP-B-378 (1 Inch Ball and Socket Arm) Assemblies with Cradle > Garmin Assemblies >

2.5 Inch Adhesive Base with Composite Standard Sized Arm and Garmin RAM-HOL-GA54U Holder (Selected dezl 760LMT and nuvi 2797LMT Series)

Alternative Views:

STOCK STATUS: Out of Stock - Email for ETA

Product Code: RAP-B-378-GA54U

QTY:

DESCRIPTION

The RAP-B-378-GA54U is a 2.5 inch diameter adhesive base mount with composite standard sized arm and composite universal diamond adapter plate with holder for the following device(s):

Garmin dezl 760LMT
Garmin nuvi 2797LMT

NOTE: As the manufacturer adds new units/models to the above series this cradle may fit additional models not listed above. CLICK HERE for the most current model information or contact us by CLICKING HERE.

RAP-B-378-GA54U Includes the Following:

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Color/Material: Black high strength composite
Socket Ball Size: B-Ball Size = 1.0 inch ball. Max Weight 5 lbs.
Base: RAP-B-378U 2.5 inch diameter adhesive base and 1 inch diameter rubber ball.
Arm: RAP-B-201U composite standard length sized arm for 1 inch balls. The arm measures 3.0 inches between socket centers (3.6875 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction.
Adapter: RAP-B-238U black composite universal diamond plate with two holes measuring 1.9 inches from hole center to hole center will accommodate the AMPS hole pattern. This plate includes a 1 inch diameter rubber ball.
Holder/Cradle: RAM-HOL-GA54U high strength plastic holder. Place the top of the device into the cradle, and then push the base into the expandable arms at the bottom of the holder. The arms will then snap into place when the device is completely secured in the cradle. The cradle allows all cables (not included) to stay connected while the device is in the cradle. Hardware to attach the holder/cradle to the RAM-B-238U is included.

Instructions

General recommendations to properly adhere the adhesive disc.
1. Ensure that both the dashboard surface and the bottom of the Ram Mount base have been thoroughly cleaned and dried.
2. Attach either side of adhesive to the base first, let it sit several hours to allow adhesive to thoroughly bond.
3. Attach other side of adhesive (with base) to the dashboard surface.
4. Let the adhesive disc sit several hours before adding socket arm components, etc. to allow the adhesive to properly bond to the dashboard surface.