Home > Cell / Smartphone Mounts > Suction Cup Universal Cell & Smartphone Assemblies >

  Single 2.7" Dia. Suction Cup Base with Twist Lock, PLASTIC Arm and RAM-HOL-UN7BU Universal X Grip Spring Loaded Holder (Fits Device Width .875" to 3.25") for iPhone, etc



 
Price $36.70


STOCK STATUS:In Stock

AVAILABILITY: Ships within 24 Hours
Product Code: RAP-B-166-2-UN7U
Qty:

DESCRIPTION
 
The RAP-B-166-2-UN7U universal suction cup mount is a high strength composite 2.7 inch diameter locking suction cup base, plastic arm and composite universal spring loaded X grip holder. The holder (RAM-HOL-UN7BU) will fit devices, including iPhones, between the following dimensions:
  • Minimum Width = 0.875"
  • NOTE: Devices at 0.875" must be a minimum of 4" in height to fit into holder
  • Maximum Width = 3.25"
  • Depth = 0.875"
This holder is compatible, but not limited, to the following cases/skins/bumpers:

NOTE: Click here for more detailed information on the RAM-HOL-UN7BU. Please call 224-578-9162 or complete the product inquiry form by clicking here.
 
RAP-B-166-2-UN7U shown above.

RAP-B-166-2-UN7U Includes the Following:
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Included Base: 2.7 inch locking suction cup base with 1 inch diameter rubber ball. This base has a strong hold on any smooth non-porous surface, but for best results mount the suction cup base to a glass surface.
  • Included Arm: RAP-B-201-1U composite arm measures approximately 2.0 inches between socket center to socket center and is 2.75 inches in total length. A tightening screw on the side of the arm enables the sockets to clamp firmly to a RAM 1 inch diameter ball. When loosening the side screw, you can pivot the ball and socket connections or completely disconnect the ball from the socket.
  • Included Holder: RAM-HOL-UN7BU
  • Holder Material: Black high strength composite with rubber tips.
    • Spring loaded holder expands and contracts for perfect fit of your devices.
    • 1 inch rubber diameter rubber ball connects to RAM "B" sized 1 inch socket parts.
    • Rubber coated tips will hold device firm and stable.
    • Single socket technology allows for multiple adjustment angles and articulation of device.
  • Manufacturer's Description: Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicles.


Browse for more products in the same category as this item:

Cell / Smartphone Mounts > Suction Cup Universal Cell & Smartphone Assemblies
Suction & Adhesive Mounts > Suction Cup Assemblies with Cradle (Garmin, Lowrance, Magellan, TomTom, GPS, Smartphone, Universal, etc.) > RAP-B-166-2 Series Assemblies > Universal Assemblies
Suction & Adhesive Mounts > Apple Suction Cup Assemblies and Cradles > iPhone Assemblies > iPhone (2nd & 3rd Gen, 3G/3GS) Assemblies
Suction & Adhesive Mounts > Apple Suction Cup Assemblies and Cradles > iPhone Assemblies > iPhone (1st Gen, Non 3G) Assemblies
Suction & Adhesive Mounts > Apple Suction Cup Assemblies and Cradles > iPhone Assemblies > iPhone 4 (4th Gen, 4G, 4S) Assemblies
Cell / Smartphone Mounts > Universal Cell & Smartphone Assemblies by Device Width (Fits Width Range from .875" to 3.5") > UN7 Series Assemblies (.875" to 3.25" Device Width)


Single 2.7" Dia. Suction Cup Base with Twist Lock, PLASTIC Arm and Apple RAM-HOL-AP10U Holder (iPod Touch 4th Gen WITHOUT Case or Cover) $20.75
Single 3.25" Dia. Suction Cup Base with Twist Lock, PLASTIC Long Length Sized Arm and Diamond Adapter Plate (Light to Medium Duty) $33.85
PLASTIC Handlebar (Mountain or Road Bicycle) Base with Standard Sized Lenth Arm with Universal Diamond Plate $16.85
Universal COMPOSITE Clamp Base (Fits Rail/Edge Lip from 0.625 to 1.25") with Standard Sized Arm & RAM-HOL-UN7BU Universal X Grip Spring Loaded Holder (Fits Device Width .875" to 3.25") for iPhone, etc $50.50
Universal COMPOSITE Clamp Base (Fits Rail/Edge Lip from 0.625" to 1.25") with Standard Arm and with Garmin RAM-HOL-GA31U Holder (Selected Oregon 200/300/400/450/550 & Approach Series) $33.75
Universal COMPOSITE Clamp Base (Fits Rail/Edge Lip from 0.625" to 1.25") with Standard Sized Arm and RAM-HOL-BC1U Holder for Hand Held Devices and 2 Way Radios $33.40
Single 3.25" Dia. Base with Twist Lock, Plastic Dual Pivot Arm and RAM-HOL-PD3U Universal Top Clamping Cradle (Fits Device Width 2.25" to 3.5" Including Most Smartphones with Cover/Case iPhone, Droid, etc.) $42.15
Single 3.25" Dia. Base with Twist Lock, Plastic Dual Pivot Arm (No Adapter) $22.25
Composite Diamond Base Plate with Standard Sized Arm and Diamond Shape Mounting Plate $16.35