Home > Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Apple Assemblies by Device Type (iPad, iPhone, iPod Touch, etc) >

  Single 2.7" Dia. Suction Cup Base with Twist Lock, PLASTIC Arm and RAM-HOL-AP6U Apple iPhone Holder (2nd & 3rd Gen 3G/3GS WITHOUT Case or Cover)
 
 
Price $20.25


STOCK STATUS:In Stock

AVAILABILITY: Ships within 24 Hours
Product Code: RAP-B-166-2-AP6U
Qty:

DESCRIPTION
 
The RAP-B-166-2-AP6U universal suction cup mount is a high strength composite 2.7 inch diameter locking suction cup base, plastic arm and universal diamond plate ideal for light duty mounting applications such as GPS or small electronic devices. This suction cup mount is for the following Apple models:
  • Apple iPhone 3G/3GS (2nd Generation)
NOTE: This cradle WILL NOT FIT the 1st generation or later iPhone models. To see all iPhone cradles click here.

NOTE: As the manufacturer adds new units/models to the above series this cradle may fit additional models not listed above. Please call 224-578-9162 or complete the product inquiry form by clicking here.


RAP-B-166-2-AP6U shown above.

RAP-B-166-2-AP6U Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Base: 2.7 inch locking suction cup base with 1 inch diameter rubber ball. This base has a strong hold on any smooth non-porous surface, but for best results mount the suction cup base to a glass surface.
  • Arm: RAP-B-201-1U composite arm measures approximately 2.0 inches between socket center to socket center and is 2.75 inches in total length. A tightening screw on the side of the arm enables the sockets to clamp firmly to a RAM 1 inch diameter ball. When loosening the side screw, you can pivot the ball and socket connections or completely disconnect the ball from the socket. The arm length is
  • Adapter: RAP-B-238U composite universal diamond plate. Two holes measuring 1.9 inches from center to center is compatible with the AMPS hole pattern and any RAM-HOL-xxxx cradle.
  • Cradle: RAM-HOL-AP6U high strength plastic holder. Place the top of the iPhone into the cradle, and then push the base into the expandable arms at the bottom of the holder. The arms will then snap into place when the iPhone is completely secured in the cradle. The cradle allows all cables (not included) to stay connected while the iPhone unit is in the cradle.

RAP-B-166-2-AP6U Options (NOT INCLUDED):


Optional Cradle(s): Additional cradles to secure Apple, cell phone or other GPS units can be viewed by clicking here.


Security and Portability Options: The RAP-326 quick release adapter allows the cradle to be easily removed if sharing the electronic device between applications (i.e. motorcycle to automobile).


Screen Magnification Options: The RAM-MAG-1U is a screen magnifier that is 2 inches by 4 inches with a 2x zoom.  


Optional Cup Holder Mounting Base: Optional RAM-299-3U cup holder base attaches to the suction cup base of the RAP-B-166-2U. This allows you to mount your device in the cup holder of your vehicle! Perfect for those who do not want to mount to the windshield.



Browse for more products in the same category as this item:

Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Apple Assemblies by Device Type (iPad, iPhone, iPod Touch, etc)
Suction & Adhesive Mounts > Suction Cup Assemblies with Cradle (Garmin, Lowrance, Magellan, TomTom, GPS, Smartphone, Universal, etc.) > RAP-B-166-2 Series Assemblies > Apple Assemblies
Suction & Adhesive Mounts > Apple Suction Cup Assemblies and Cradles > iPhone Assemblies > iPhone (2nd & 3rd Gen, 3G/3GS) Assemblies


Triple 3.25" Dia. Suction Cup Base with Twist Lock, Standard Sized Length Arm and 75/100mm VESA Plate (Heavy Duty) $80.30
Lil' Buddy Universal Mount with SPOT RAM-HOL-SPO2 Holder for SPOT IS Satellite GPS Messenger $15.05
Lil' Buddy Universal Mount with Garmin RAM-HOL-GA34U Holder for Selected nuvi 1300 & 2400 Series $17.50
Lil' Buddy Universal Mount with Garmin RAM-HOL-GA35U Holder for Selected nuvi 1450 & 1490T Series $18.15
Lil' Buddy Universal Mount with Garmin RAM-HOL-GA33U Holder for Selected nuvi 1200 Series $17.05
Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter) with Standard Sized Arm and Tough Tray II for Small to Med. Sized Devices (Fits iPad with Case/Cover & Various Tablets, Netbooks) $66.95
Tripod Workstation with Handi-Case $272.50
Brake/Clutch Assembly Mount or U-Bolt Handlebar Mount with Standard Sized Arm and Apple RAM-HOL-AP7U Holder (iPod Touch 2nd & 3rd Gen WITHOUT Case or Cover) $36.25
Universal RAM Pod I Single Leg Mount with 1.5 Inch Socket with Tough Tray II for Small to Med. Sized Devices (Fits iPad with Case/Cover & Various Tablets, Netbooks) $71.95