Home > Smartphone Mounts > Universal Cell & Smartphone Assemblies by Device Width (Fits Width Range from .875" to 4.5") > UN10BU Series Assemblies (1.75" to 4.5" Device Width) >

Universal COMPOSITE Aviation Yoke "C" Clamp Base (Fits Rail/Edge Lip from 0.625 to 1.25") with Std Sized Arm and RAM-HOL-UN10BU Large X-Grip Phone Holder (Fits Device Width 1.75" to 4.5")
Universal COMPOSITE Aviation Yoke "C" Clamp Base (Fits Rail/Edge Lip from 0.625 to 1.25") with Std Sized Arm and RAM-HOL-UN10BU Large X-Grip Phone Holder (Fits Device Width 1.75" to 4.5")


 
Alternative Views:

STOCK STATUS: In Stock - Ships Next Bus. Day


Product Code: RAP-B-121-UN10U
QTY:

DESCRIPTION
 
The RAP-B-121-UN10U is a composite clamp base mount assembly that will accommodate a rail or edge lip from 5/8 inch to 1.25 inches (commonly used in aviation or golf cart applications), standard sized length arm and universal X Grip IV holder. This holder (RAM-HOL-UN10BU) will accommodate electronic devices within the following dimensions:
  • Minimum Width = 1.75"
  • Maximum Width = 4.5"

NOTE: Questions? Contact us by clicking here.


RAP-B-121-UN10U shown above.

RAP-B-121-UN10U Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Color/Material: High strength composite mount with composite, stainless steel and rubber tip holder.
  • Socket Ball Size: B-Ball Size = 1.0 inch Ball. Maximum suggested weight 5 lbs.
  • Included Base: RAP-B-121BU composite clamp mount base fits a rail diameter from 5/8 inch to a maximum of 1.25 inches. The 1.0 inch rubber ball sits at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. To mount the base, simply place the yoke clamps around the rail and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes and unusual shaped motorbike rails. The rail does not need to be perfectly round to use this base.
    • Second Mounting Ball: Optional. Add the RAP-B-121BBU creating a double ball base. This 1.5 inch diameter ball allows a second mounting point to add additional accessories. The mounting point is located on top of the RAP-B-121BU base.
  • Manufacturer's Base Description: The RAM composite glareshield/yoke base is ideally suited for a day on the wing and yet easily removed for travel in the flight bag. Both strong and light weight, this new clamping base is perfect for numerous electronic devices commonly found in the cockpit. Modular in design, switch out the clamps for a perfect fit no matter what the mounting surface, or add a second ball to mount another device; brilliant. Crafted to hold firm to most glare shields, yokes, or tubing, practically any aircraft can benefit from this product. Simple to use and exceptionally versatile, RAM has created another “must have” for any pilot. Once you’ve had a chance to use this great little device, we’re confident you’ll find uses for it no matter what you fly, drive, or ride. With everything you get in this package, you may even find yourself using your new RAM Mount on a golf cart, work bench, or even exercise equipment. With RAM, there are no limits.
  • Included Arm: RAP-B-201U composite standard sized length arm for 1.0 inch balls. The arm measures 3.0 inches between socket centers (3.6875 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction.
  • Included Holder RAM-HOL-UN10BU:
    • Spring loaded holder expands and contracts for perfect fit of your device.
    • 1.0 inch rubber diameter rubber ball is attached to the cradle.
    • Rubber coated tips will hold device firm and stable.
    • Versatility of holder allows for attachment to many RAM-to-RAM ball mounts.
    • Single socket technology allows for multiple adjustment angles and articulation of device.
  • Manufacturer's Cradle Description: The X-Grip IV has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. The perfect complement to the modern sleek interior of today's vehicles, the X-Grip IV is the phablet holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phablet and become the most useful accessory in your vehicle.


Browse for more products in the same category as this item:

Smartphone Mounts > Universal Cell & Smartphone Assemblies by Device Width (Fits Width Range from .875" to 4.5") > UN10BU Series Assemblies (1.75" to 4.5" Device Width)
Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Yoke Mount Assemblies (Fits .5" to 2.58" Rail Diameter) > Composite Yoke Assemblies RAP-B-121 Series Assemblies (Fits 0.625" to 1.25" Rail Diameter) > Universal Assemblies (iPhone, Smartphone, Netbook, Tablet, etc.)
Smartphone Mounts > Aviation Universal Cell & Smartphone Assemblies > X Gripping Universal Assemblies