Home > Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Flat Surface RAM-B-138 Assemblies >

Universal COMPOSITE Aviation Yoke "C" Clamp Base (Fits Rail/Edge Lip from 0.625" to 1.25") with Standard Sized Arm and RAM-HOL-AP8U Holder for Apple iPad 4, iPad 3, iPad HD, iPad 2, iPad WITHOUT Case or Cover
Universal COMPOSITE Aviation Yoke "C" Clamp Base (Fits Rail/Edge Lip from 0.625" to 1.25") with Standard Sized Arm and RAM-HOL-AP8U Holder for Apple iPad 4, iPad 3, iPad HD, iPad 2, iPad WITHOUT Case or Cover


 
Alternative Views:

STOCK STATUS: Out of Stock - Email for ETA


Product Code: RAP-B-121-AP8U
QTY:

DESCRIPTION
 
The RAP-B-121-AP8U is a composite clamp base mount assembly that will accommodate a rail or edge lip from 5/8 inch to 1.25 inches (commonly used in aviation applications). The assembly includes a standard sized arm, universal round plate and cradle for the following devices (WITHOUT a bumper cover, case or skin):
  • Apple iPad 1st Generation
  • Apple iPad 2
  • Apple iPad 3 / iPad HD
  • Apple iPad 4
  • HP TouchPad 1st Generation
NOTE: This cradle may fit additional models not listed above. Please see the cradle specifications below to see if this cradle will accommodate your electronic device. Please call 224-578-9162 or complete the product inquiry form by clicking here.
RAP-B-121-AP8U shown above. 

RAP-B-121-AP8U Includes the Following:

  • Warranty: Manufacturer's, RAP Mounts (National Products Inc.), Limited Life Time Warranty.
  • Color/Material: Black composite assembly. 
  • Socket Ball Size: B-Ball Size = 1.0 inch Ball. Maximum suggested weight 5 lbs.
  • RAP-B-121-AP8U includes the RAP-B-121-202U shown below. The RAP-B-121-202U consists of the RAP-B-121BU, RAP-B-201U and RAP-B-202U.
   
  • NOTE: Picture below shows a diamond plate adapter versus the included RAP-B-202U adapter for illustration purposes.
  • Yoke Base: RAP-B-121BU composite clamp base mount accommodates a rail or edge lip from 5/8 inch to a maximum of 1.25 inches. The 1 inch rubber ball sits at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. To mount the base, simply place the clamps around the rail or edge and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes and unusual shaped motorbike rails. The rail does not need to be perfectly round to use this base.
  • Arm: RAP-B-201U standard length arm for 1 inch balls. The arm measures 2.875 inches between socket centers (3.6875 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction. 
  • Adapter: RAP-B-202U universal 2.5 inch round diameter plate with pre-drilled holes that accommodates the AMPS hole pattern.
  • Cradle: Included RAM-HOL-AP8U high strength plastic holder for the devices specified above. Place the top of the device into the cradle, and then push the base into the expandable arms at the bottom of the holder. The arms will then snap into place when the device is completely secured in the cradle. The cradle allows all cables (not included) to stay connected while the device unit is in the cradle. Hardware to attach the holder/cradle to the RAP-B-202U is included.


Browse for more products in the same category as this item:

Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Flat Surface RAM-B-138 Assemblies
Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Yoke Mount Assemblies (Fits .5" to 2.58" Rail Diameter) > Composite Yoke Assemblies RAP-B-121 Series Assemblies (Fits 0.625" to 1.25" Rail Diameter) > Apple Assemblies