Home > Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Yoke Mount Assemblies (Fits .5" to 2.58" Rail Diameter) > Composite Yoke Assemblies RAP-B-121 Series Assemblies (Fits 0.625" to 1.25" Rail Diameter) > Apple Assemblies >

Universal COMPOSITE Aviation Yoke "C" Clamp Base (Fits Rail/Edge Lip from 0.625" to 1.25") with Standard Sized Arm with RAM-HOL-AP11U Apple iPhone 5 Holder (Fits iPhone 5/5S WITHOUT Case or Cover)
Universal COMPOSITE Aviation Yoke "C" Clamp Base (Fits Rail/Edge Lip from 0.625" to 1.25") with Standard Sized  Arm with RAM-HOL-AP11U Apple iPhone 5 Holder (Fits iPhone 5/5S WITHOUT Case or Cover)


 
Alternative Views:



STOCK STATUS: Out of Stock - Email for ETA


Product Code: RAP-B-121-AP11U
QTY:

DESCRIPTION
 
The RAP-B-121-AP11U is a composite clamp base mount assembly that will accommodate a rail or edge lip from 5/8 inch to 1.25 inches (commonly used in aviation applications). The assembly includes a standard sized arm, universal diamond plate and cradle for the following devices:
  • Apple iPhone 5, 5S
NOTE: This cradle does not fit 1st, 2nd, 3rd or 4th generation iPhone's. Questions? Please call 224-578-9162 or complete the product inquiry form by clicking here.
 
RAP-B-121-AP11U shown above

RAP-B-121-AP11U Includes the Following:

  • Warranty: Manufacturer's, RAP Mounts (National Products Inc.), Limited Life Time Warranty.
  • Color/Material: Black composite assembly. 
  • Socket Ball Size: B-Ball Size = 1.0 inch Ball. Maximum suggested weight 5 lbs.
  • RAP-B-121-AP11U includes the RAP-B-121-238U shown below. The RAP-B-121-238U consists of the RAP-B-121BU, RAP-B-201U and RAP-B-238U.

  • Yoke Base: RAP-B-121BU composite clamp base mount accommodates a rail or edge lip from 5/8 inch to a maximum of 1.25 inches. The 1 inch rubber ball sits at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. To mount the base, simply place the clamps around the rail or edge and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes and unusual shaped motorbike rails. The rail does not need to be perfectly round to use this base.
  • Arm: RAP-B-201U standard length arm for 1 inch balls. The arm measures 2.875 inches between socket centers (3.69 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction. 
  • Adapter: RAP-B-238U universal diamond plate with pre-drilled holes that accommodates the AMPS hole pattern.
  • Cradle: Included RAM-HOL-AP11U high strength plastic holder for the Apple iPhone specified above. Place the top of the Apple iPhone into the cradle, and then push the base into the expandable arms at the bottom of the holder. The arms will then snap into place when the iPhone is completely secured in the cradle. The cradle allows all cables (not included) to stay connected while the iPhone unit is in the cradle. Hardware to attach the holder/cradle to the RAP-B-238U is included.
  • Cradle/Holders/:OPTIONAL. Select a holder for Apple, cell phones, GPS systems and electronic devices by clicking here.
Alternative Mounts that fit the iPhone 5 WITH or WITHOUT a Case or Sleeve:
Click here, to view X-Grip cradle for the Apple iPhone 5, 5S
Click here, to view Top Clamping cradle for Apple iPhone 5, 5S
Click here, to view Finger Gripping holder for Apple iPhone 5, 5S
Click here, to view AQUA-BOX Pro Water Resistant Case for the iPhone 5, 5S


Browse for more products in the same category as this item:

Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Yoke Mount Assemblies (Fits .5" to 2.58" Rail Diameter) > Composite Yoke Assemblies RAP-B-121 Series Assemblies (Fits 0.625" to 1.25" Rail Diameter) > Apple Assemblies