 |
The RAM-VB-181-D-2461U is a black powder coated steel Drill Down vertical base (must be installed on flat and level vertical surface) that installs with minor drilling and bolting, 12 inch swing arm extension and RAM D sized 3.68 inch square VESA 75mm compatible plate with 2.25 inch diameter rubber ball.
RAM-VB-181-D-2461U shown above.
RAM-VB-181-D-2461U Features:
Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
VESA Plate Included: RAM--D-2461U is a black powder coated marine grade aluminum 3.68 Inch square VESA 75mm compatible plate with 2.25 Inch diameter rubber ball. The 3.68 inch square plate with four pre-drilled holes located 75mm apart. Maximum suggested weight is 15 lbs.
Swing Arm Included: RAM-VB-D-110-1NBU is a black powder coated steel 12 inch long swing when fully extended. One side connects to the vertical "tele-pole" and the other side contains a 2.25 inch diameter open socket that fits RAM D sized accessories. A twist knob between the two 6 inch swing arms allows you to move the swing arm in the horizontal direction. Another twist knob at the end of the 2.25 inch socket allows you to articulate the attached accessory in the vertical plane.
Tele-Pole Included: RAM-VP-TTM8U is a 8 inch male upper tele-pole used to connect to the swing arm and vehicle base of the RAM Mount vehicle laptop mount system.
Vehicle Base Included: RAM-VB-181 shown below.
The RAM-VB-181 is a Drill Down base that installs with minor drilling and bolting. Fits all vehicles with a vertical flat surface.
RAM-VB-181 Dimensions:
- Lower Tele-Pole Dimensions: A = 3", B = 7.5", C = 2.029", Base Hole Centers = 3.34"
- Back Plate Dimensions: A = 3.25", B = 1.5", Back Plate Hole Centers = 2"
|
|
|
