RAM-VB-168-246 vehicle VESA stand (compatible with Motorola VC6096) for the following vehicles:
- Freightliner Trucks
- International Trucks
- Kenworth Trucks
- Peterbilt Trucks
- Volvo Trucks
RAM-VB-168-246 shown above with Motorola VC6096 (Not Included).
NOTE: If the heater box in under the seat, the installer may need to
drill holes in the base to accommodate vehicle mounting holes or studs.
Also, the heater box may cause the system to sit higher than normal.
Pole may be cut down by installer to lower kit. This will not void the
warranty.
NOTE: As manufacturers redesign vehicle models the vehicle base specified in this laptop mount system may not fit previous or newer generation vehicle models. Please call 224-578-9162
or complete the product inquiry form by clicking here to inquire about your vehicle model if unsure.
This no-drill laptop stand system includes the VESA plate, articulating arm, tele-pole and vehicle base. This system installs quickly and easily into the specified
vehicles using the existing hardware of the passenger side seat rails.
See the installation video by clicking here. This laptop configuration provides a telescoping feature that allows a
vertical height adjustment range from 18 to 24 inches (additional height ranges are available). Dual swing arms provide
articulation and 12 inches of extension from the installation origin of the mounted device (additional extension is available). The
patented rubber ball and socket joint provides additional adjustment as
well as shock and vibration isolation. Please read below for features and available customization options (HAM Radio adapters, printer mounts, laptop tray locks, Panasonic Toughbook mounts, etc.)
RAM-VB-168-246 Features and Available Options:
- Warranty: Manufacturer's, RAM Mounts (National
Products Inc.), Limited Life Time Warranty
- VESA Plate: RAM-246U is a marine grade aluminum square plate with 1.5 inch diameter rubber ball. The VESA plate has a 75/100 mm hole pattern. Compatible with most VESA plate electronic devices.
- Articulating Arm: RAM-VB-110-1U black powder coated steel dual swing arm with 12 inches of total extension. Connects to the Tough Tray and upper tele-pole.
- Articulating Arm Options:
- RAM-VB-109-3U 6 inch swing arm extension. Provides a total of 18 inches of total extension when added to the RAM-VB-110-1U.
- Telescoping Pole: "Tele-Pole" showed assembled with bottom tele-pole RAM-VB-TBF18U and upper
tele-pole RAM-VB-TTM12U (far left picture below). The tele-pole allows
a height adjustment range from 18 to 24 inches. For an even more custom installation, the tele-pole may be easily cut with a hack saw to a more desired length.
- Upper Tele-Pole: RAM-VP-TTM12U black powder coated steel 12 inch upper tele-pole mates to the articulating arm and lower tele-pole.
- Upper Tele-Pole Dimensions: A = 1.328" OD, B = 2.5", C = 12"
- Lower Tele-Pole: RAM-VB-TBF18U
black powder coated steel 18 inch lower tele-pole mates to the upper tele-pole and vehicle base.
- Lower Tele-Pole Dimensions: A = 1.375" OD, B = 3.5", C = 18"
- Tele-Pole Options:
- Printer Mounts are available by clicking here.
- RAM-VB-REM1 quick disconnect allows the entire laptop system from the vehicle base upwards to be disconnected by removing a quick release pin. Perfect for individuals using a vehicle for both work and personal use, one of the most popular options!
- RAM-VB-ADJ1 Adjust-A-Pole allows additional adjustment of the tele-pole system away from seats or center consoles. NOTE: The RAM-VB-ADJ1 is included in some laptop mounts such as the RAM-VB-159-SW1.
- Additional tele-pole options are available by clicking here.
- Vehicle Base: Black powder coated steel base for the specified vehicles attaches to the passenger seat rails using existing hardware.
- NOTE: Some vehicle bases may limit seat travel.
- NOTE: May not work with swivel style seats for big rigs.
- NOTE: Placement of Mount: Passenger side on the floor, under front seat.
- NOTE: Seat Configuration: Bucket/Bench seats.
Optional RAM-VB-109-3U Swing Arm Extension and Tele-Pole Printer Mount shown above.
Optional RAM-ADJ-1 Adjust-A-Pole and RAM-VB-REM1 Quick Disconnect shown above. Note: RAM-ADJ-1 can be used with RAM-VB-REM1.
Additional mounting solutions include the Panasonic Toughbook, HAM Radio
and Tough Tray II for medium sized electronic devices.
