themountdepot.com

• Freightliner Trucks
• International Trucks
• Kenworth Trucks
• Peterbilt Trucks 
• Volvo Trucks

RAM-VB-168-2461 shown above.

NOTE: If the heater box in under the seat, the installer may need to drill holes in the base to accommodate vehicle mounting holes or studs. Also, the heater box may cause the system to sit higher than normal. Pole may be cut down by installer to lower kit. This will not void the warranty.

NOTE: As manufacturers redesign vehicle models the vehicle base specified in this laptop mount system may not fit previous or newer generation vehicle models. Please call 224-578-9162 or complete the product inquiry form by clicking here to inquire about your vehicle model if unsure.

RAM-VB-168-246 Features and Available Options:

• Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
• VESA Plate: RAM-2461U is a marine grade aluminum square plate with 1.5 inch diameter rubber ball. The VESA plate is compatible with the electronic devices specified above and had a 4 x 75mm hole pattern.
  

               

• Articulating Arm: RAM-VB-110-1U black powder coated steel dual swing arm with 12 inches of total extension. Connects to the Tough Tray and upper tele-pole. 
  

       

• Articulating Arm Options:
  
• RAM-VB-109-3U 6 inch swing arm extension. Provides a total of 18 inches of total extension when added to the RAM-VB-110-1U.
  

• Telescoping Pole: "Tele-Pole" showed assembled with bottom tele-pole RAM-VB-TBF18U and upper tele-pole RAM-VB-TTM12U (far left picture below). The tele-pole allows a height adjustment range from 18 to 24 inches. For an even more custom installation, the tele-pole may be easily cut with a hack saw to a more desired length.
  

        

• Upper Tele-Pole: RAM-VP-TTM12U black powder coated steel 12 inch upper tele-pole mates to the articulating arm and lower tele-pole.
  
• Upper Tele-Pole Dimensions: A = 1.328" OD, B = 2.5", C = 12"

        

• Lower Tele-Pole: RAM-VB-TBF18U  black powder coated steel 18 inch lower tele-pole mates to the upper tele-pole and vehicle base.
  
• Lower Tele-Pole Dimensions: A = 1.375" OD, B = 3.5", C = 18"
  
• Tele-Pole Options:
  
• Printer Mounts are available by clicking here.
• RAM-VB-REM1 quick disconnect allows the entire laptop system from the vehicle base upwards to be disconnected by removing a quick release pin. Perfect for individuals using a vehicle for both work and personal use, one of the most popular options!
  
• RAM-VB-ADJ1 Adjust-A-Pole allows additional adjustment of the tele-pole system away from seats or center consoles.
  
• Additional tele-pole options are available by clicking here.

• Vehicle Base: Black powder coated steel base for the specified vehicles attaches to the passenger seat rails using existing hardware.
• NOTE: Some vehicle bases may limit seat travel.
• NOTE: May not work with swivel style seats for big rigs.
• NOTE: Placement of Mount: Passenger side on the floor, under front seat.
• NOTE: Seat Configuration: Bucket/Bench seats.
  

Optional RAM-VB-109-3U Swing Arm Extension and Tele-Pole Printer Mount shown above.

Optional RAM-ADJ-1 Adjust-A-Pole and RAM-VB-REM1 Quick Disconnect shown above. Note: RAM-ADJ-1 can be used with RAM-VB-REM1.