RAM-VB-160-SW1 vehicle laptop stand for the following vehicles:
- Chevrolet Impala (2006-2009) without Power Seats
NOTE: Base will not work with any vehicles that have powered seats. NOTE: As manufacturers redesign vehicle models the vehicle base specified in this laptop mount system may not fit previous or newer generation vehicle models. Please call 224-578-9162
or complete the product inquiry form by clicking here to inquire about your vehicle model if unsure.
This no-drill laptop stand system includes the laptop "Tough Tray", articulating arm, tele-pole and vehicle base. This system installs quickly and easily into the specified
vehicles using the existing hardware of the passenger side seat rails.
See the installation video by clicking here. This laptop configuration provides a telescoping feature that allows a
vertical height adjustment range from 12 to 18 inches (additional height ranges are available). Dual swing arms provide
articulation and 12 inches of extension from the installation origin of the mounted device (additional extension is available). The
patented rubber ball and socket joint provides additional adjustment as
well as shock and vibration isolation. The laptop tray "Tough Tray" is
a spring loaded tray that accommodates 10 to 16 inch wide laptops (17 inch wide
screens). The tray features four adjustable retaining arms with a rubber
grip feature. These arms can be moved both vertically and horizontally for adjustment to the electronic device being secured. Please read below for features and available customization options (VESA and HAM Radio adapters, printer mounts, laptop tray locks and screen supports, Panasonic Toughbook mounts, etc.)
RAM-VB-160-SW1 Features and Available Options:
- Warranty: Manufacturer's, RAM Mounts (National
Products Inc.), Limited Life Time Warranty
- Tough Tray: RAM-234-3 Laptop "Tough Tray" high strength composite spring loaded expandable tray. Accommodates laptops from 10-16 inches wide (screen sizes
up to 17 inches). The tray includes 4 side clamping fingers with rubber
grips. The fingers are fully adjustable and can be moved both
vertically and horizontally.

- NOTE: RAM Mounts recommends the RAM-234-SNMU Safe-n-Secure kit if the laptop mount is intended to hold an electronic device while the vehicle is in motion.
- A smaller Tough Tray RAM-234-6 for medium sized device is available. VESA plates, HAM Radio and Panasonic Toughbook laptop trays are also available. The Mount Depot can customize a laptop mount system for your application.
- Tough Tray Options Listed Below:
- RAM-234-S2U locking screen support secures the laptop screen in a locked position.
- RAM-234K1-4U flat side arms allow the laptop lid to close flat when not in use.
- RAM-234-5U power caddy secures power adapters and cords.
- All Tough Tray options can be viewed by clicking here.
- Articulating Arm: RAM-VB-110-1U black powder coated steel dual swing arm with 12 inches of total extension. Connects to the Tough Tray and upper tele-pole.

- Articulating Arm Options:
- RAM-VB-109-3U 6 inch swing arm extension. Provides a total of 18 inches of total extension when added to the RAM-VB-110-1U.
- Telescoping Pole: "Tele-Pole" showed assembled with bottom tele-pole RAM-VB-TBF9U and upper
tele-pole RAM-VB-TTM8U (far left picture below). The tele-pole allows
a height adjustment range from 12 to 18 inches. For an even more custom installation, the tele-pole may be easily cut with a hack saw to a more desired length.
 
- Upper Tele-Pole: RAM-VP-TTM8U black powder coated steel 8 inch upper tele-pole mates to the articulating arm and lower tele-pole.
- Upper Tele-Pole Dimensions: A = 1.328" OD, B = 2.5", C = 8"
  - Lower Tele-Pole: RAM-VP-TBF9U black powder coated steel 9 inch lower tele-pole mates to the upper tele-pole and vehicle base.
- Lower Tele-Pole Dimensions: A = 1.375" OD, B = 3.5", C = 9"
  - Tele-Pole Options:
- Printer Mounts are available by clicking here.
- RAM-VB-REM1 quick disconnect allows the entire laptop system from the vehicle base upwards to be disconnected by removing a quick release pin. Perfect for individuals using a vehicle for both work and personal use, one of the most popular options!
- RAM-VB-ADJ1 Adjust-A-Pole allows additional adjustment of the tele-pole system away from seats or center consoles. NOTE: The RAM-VB-ADJ1 is included in some laptop mounts such as the RAM-VB-159-SW1.
- Longer lower tele-poles up to 18 inches and longer upper tele-poles up to 12 inches are available. Additional tele-pole options are available by clicking here.
- Vehicle Base: Black powder coated steel base for the specified vehicles attaches to the passenger seat rails using existing hardware.
- NOTE: Some vehicle bases may limit seat travel.
- NOTE: Base will not work with any vehicles that have powered seats.
 RAM-VB-160-SW1 shown above.
  Included RAM-234-3 Tough Tray pictures shown above with dimensions.
 Optional RAM-234-SNMU Safe-n-Secure kit shown above is recommended if the laptop mount is intended to hold an electronic device while the vehicle is in motion.
   Optional RAM-234-5U Power Caddy, RAM-234-S2U Screen Support and RAM-234K1-4U Flat Side Arms shown above.
  Optional RAM-VB-109-3U Swing Arm Extension and Tele-Pole Printer Mount shown above.
   Optional RAM-ADJ-1 Adjust-A-Pole and RAM-VB-REM1 Quick Disconnect shown above. Note: RAM-ADJ-1 is included in several laptop mounts such as the RAM-VB-159-SW1. RAM-ADJ-1 can be used with RAM-VB-REM1.
   
Additional mounting solutions include the Panasonic Toughbook, HAM Radio
and VESA plates, and Tough Tray II for medium sized electronic devices.
|