themountdepot.com

Chevrolet Camaro (1993-2002)
Chevrolet Caprice (1990-1995)
Ford Crown Victoria Police Interceptor (1991-2011)
Lincoln Town Car (2005-2010)

RAM-VB-117-SW1 Manufacturer Included Components (From Tray to Base):

NOTE: Manufacturer components can change without notice.

NOTE: Click the links below for pictures and detailed part information.

• Tough Tray: RAM-234-3 spring loaded expandable tray. Accommodates laptops from 10-16 inches wide (screen sizes up to 17 inches).
• NOTE: RAM Mounts Recommends the optional RAM-234-SNMU Secure-N-Motion kit if the Tough-Tray is intended to hold a laptop or device while the vehicle is in motion. 
• NOTE: The RAM-234-6 fits smaller devices and can be substituted. 
• Swing Arm: RAM-VB-110-1U dual swing arms provide 12 inches of total horizontal extension.
• Upper Tele-Pole: RAM-VP-TTM8U 8 inch male upper tele-pole.
• Lower Tele-Pole: Integrated into vehicle base.
• NOTE: Tele-poles feature a telescoping vertical height adjustment range from 12 to 18 inches.
• Vehicle Base: RAM-VB-117 no-drill base for the specified vehicles.

• Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
• Material: Black powder coated steel with composite Tough Tray.
• Seat Configuration: Bucket, Bench, 60-40 Split seat.
• Installation: No-drill installation. Attaches to existing seat studs.
• Mount/Base Placement: Passenger side on the floor, under seat. 
  • NOTE: Vehicle base will limit seat travel.
• Vehicle Base Dimensions:
  • Dimension A: 17.57 inches
  • Dimension B: 8.5 inches
  • Dimension C: 11.0 inches
  • Center to Center Hole Seat Bolt Distance: 6.38 inches
  • NOTE: Center to Center Hole Seat Bolt Distance is the center hole distance of the two pre-drilled holes in the vehicle base that line up with the vehicle seat bolts. This distance MUST MATCH your vehicle.

                  

• Click here to view Tough Tray accessories (i.e. Screen Support).
• Click here to view Tele-Pole accessories (i.e. Remove-A-Pole).
• Click here to view all printer mounts.
• Click here to view all laptop accessories.

• Below are manufacturer component specifications.
• NOTE: Manufacturer specifications and design can change without notice. 
• Tough Tray: RAM-234-3 Laptop "Tough Tray"
• Click here to see the RAM-234-3 parts list.
• NOTE: The RAM-234-3 tray is pre-assembled.
• 
• High strength composite spring loaded expandable tray. Accommodates laptops from 10-16 inches wide (screen size up to 17 inches). Includes 4 side clamping fingers with rubber grips. The fingers are fully adjustable and can be moved both vertically and horizontally.
  Tough Tray Dimensions:
  Tray Depth: 10.0"
  Tray Thickness: 2.125"
  Tray Width (Expansion): 10" (min) to 16" (max)
  Side Clamp Arm Height: 0.5" (min) to 1.75" (max)
• NOTE: RAM Mounts recommends the RAM-234-SNMU Safe-n-Secure kit if the Tough Tray is going to secure a laptop while the vehicle is in motion.
• Articulating Swing Arm: RAM-VB-110-1U dual swing arm.
  Provides 12 inches of total horizontal extension.
• Black powder coated steel with composite twist knobs.
• Connects to the Tough Tray and upper Tele-Pole. 
•       
• Telescoping Tele-Pole: 12 to 18 inch vertical height adjustment range.
• Tele-Pole may be easily cut with a hack saw to a more desired length.
• 
• Upper Tele-Pole: RAM-VP-TTM8U black powder coated steel upper tele-pole mates to the articulating swing arm and lower tele-pole.
  Click here to see the upper tele-pole parts list.
  NOTE: The upper tele-pole is pre-assembled.
  Upper Tele-Pole Dimensions:
• A = 1.328" Outside Diameter
  B = 2.5" Outside Diameter
  C = 8" Tall
•   
• Lower Tele-Pole: Integrated into vehicle base.
• Vehicle Base: See vehicle base dimensions in the Description tab.