themountdepot.com

• Ford F-150 (2004-2011)
• Lincoln Mark LT (2005-Newer)

NOTE: As manufacturers redesign vehicle models the vehicle base specified in this laptop mount system may not fit previous or newer generation vehicle models. Please call 224-578-9162 or complete the product inquiry form by clicking here to inquire about your vehicle model if unsure.

This no-drill laptop stand system includes the VESA plate, articulating arm, tele-pole and vehicle base. This system installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. See the installation video by clicking here. This laptop configuration provides a telescoping feature that allows a vertical height adjustment range from 12 to 18 inches (additional height ranges are available). Dual swing arms provide articulation and 12 inches of extension from the installation origin of the mounted device (additional extension is available). The patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation.  Please read below for features and available customization options (HAM Radio adapters, printer mounts, laptop tray locks, Panasonic Toughbook mounts, etc.)

RAM-VB-109-246 Features and Available Options:

• Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
• VESA Plate: RAM-246U is a marine grade aluminum square plate with 1.5 inch diameter rubber ball. The VESA plate has a 75/100 mm hole pattern. Compatible with most VESA plate electronic devices.

        

• Articulating Arm: RAM-VB-110-1U black powder coated steel dual swing arm with 12 inches of total extension. Connects to the Tough Tray and upper tele-pole. 
  

       

• Articulating Arm Options:
  
• RAM-VB-109-3U 6 inch swing arm extension. Provides a total of 18 inches of total extension when added to the RAM-VB-110-1U.
  

• Telescoping Pole: "Tele-Pole" showed assembled with bottom tele-pole RAM-VB-TBF9U and upper tele-pole RAM-VB-TTM8U (far left picture below). The tele-pole allows a height adjustment range from 12 to 18 inches. For an even more custom installation, the tele-pole may be easily cut with a hack saw to a more desired length.
  

        

• Upper Tele-Pole: RAM-VP-TTM8U black powder coated steel 8 inch upper tele-pole mates to the articulating arm and lower tele-pole.
  
• Upper Tele-Pole Dimensions: A = 1.328" OD, B = 2.5", C = 8"

        

• Lower Tele-Pole: RAM-VB-TBF9U  black powder coated steel 9 inch lower tele-pole mates to the upper tele-pole and vehicle base.
  
• Lower Tele-Pole Dimensions: A = 1.375" OD, B = 3.5", C = 9"
  
• Tele-Pole Options:
  
• Printer Mounts are available by clicking here.
• RAM-VB-REM1 quick disconnect allows the entire laptop system from the vehicle base upwards to be disconnected by removing a quick release pin. Perfect for individuals using a vehicle for both work and personal use, one of the most popular options!
  
• RAM-VB-ADJ1 Adjust-A-Pole allows additional adjustment of the tele-pole system away from seats or center consoles.
  
• Additional tele-pole options are available by clicking here.

• Vehicle Base: Black powder coated steel base for the specified vehicles attaches to the passenger seat rails using existing hardware.
• NOTE: Some vehicle bases may limit seat travel.
• NOTE: Placement of Mount: Passenger side floor board, under seat.
• NOTE: Seat Configuration: Bucket/bench seats.