themountdepot.com

• Dodge Ram 1500 (2002-2007)
• Dodge Ram 2500/3500/4500/5500 Series (2003-2007)
  

NOTE: Please see the RAM-VB-178-SW1 for 2008 and newer model year Dodge RAM pickups by clicking here. Please call 224-578-9162 or complete the product inquiry form by clicking here to inquire about your vehicle model if you are unsure.

RAM-VB-104-SW1 shown above.

NOTE: Seat Configuration: Bucket/bench seats.

RAM-VB-104-SW1 Features and Available Options:

• Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty
• Tough Tray: RAM-234-3 Laptop "Tough Tray" high strength composite spring loaded expandable tray. Accommodates laptops from 10-16 inches wide (screen sizes up to 17 inches). The tray includes 4 side clamping fingers with rubber grips. The fingers are fully adjustable and can be moved both vertically and horizontally.

        

• NOTE: RAM Mounts recommends the RAM-234-SNMU Safe-n-Secure kit if the laptop mount is intended to hold an electronic device while the vehicle is in motion.
• A smaller Tough Tray RAM-234-6 for medium sized device is available. VESA plates, HAM Radio and Panasonic Toughbook laptop trays are also available.  The Mount Depot can customize a laptop mount system for your application. 
• Tough Tray Options Listed Below:
  
• RAM-234-S2U locking screen support secures the laptop screen in a locked position.
  
• RAM-234K1-4U flat side arms allow the laptop lid to close flat when not in use.
  
• RAM-234-5U power caddy secures power adapters and cords.
  
• All Tough Tray options can be viewed by clicking here.
  

• Articulating Arm: RAM-VB-110-1U black powder coated steel dual swing arm with 12 inches of total extension. Connects to the Tough Tray and upper tele-pole. 
  

       

• Articulating Arm Options:
  
• RAM-VB-109-3U 6 inch swing arm extension. Provides a total of 18 inches of total extension when added to the RAM-VB-110-1U.
  

• Telescoping Pole: "Tele-Pole" showed assembled with bottom tele-pole RAM-VB-TBF9U and upper tele-pole RAM-VB-TTM8U (far left picture below). The tele-pole allows a height adjustment range from 12 to 18 inches. For an even more custom installation, the tele-pole may be easily cut with a hack saw to a more desired length.
  

        

• Upper Tele-Pole: RAM-VP-TTM8U black powder coated steel 8 inch upper tele-pole mates to the articulating arm and lower tele-pole.
  
• Upper Tele-Pole Dimensions: A = 1.328" OD, B = 2.5", C = 8"

        

• Lower Tele-Pole: RAM-VP-TBF9U black powder coated steel 9 inch lower tele-pole mates to the upper tele-pole and vehicle base.
  
• Lower Tele-Pole Dimensions: A = 1.375" OD, B = 3.5", C = 9"
  
• Tele-Pole Options:
  
• Printer Mounts are available by clicking here.
• RAM-VB-REM1 quick disconnect allows the entire laptop system from the vehicle base upwards to be disconnected by removing a quick release pin. Perfect for individuals using a vehicle for both work and personal use, one of the most popular options!
  
• RAM-VB-ADJ1 Adjust-A-Pole allows additional adjustment of the tele-pole system away from seats or center consoles. NOTE: The RAM-VB-ADJ1 is included in some laptop mounts such as the RAM-VB-159-SW1.
  
• Longer lower tele-poles up to 18 inches and longer upper tele-poles up to 12 inches are available. Additional tele-pole options are available by clicking here.

• Vehicle Base: Black powder coated steel base for the specified vehicles attaches to the passenger seat rails using existing hardware.
• NOTE: Some vehicle bases may limit seat travel.
• NOTE: There are a total of 2 pieces of steel that make this part. The 2 pieces are welded together. 
  
• NOTE: One offset universal mount step is already included with this vehicle base. Step feature allows minimized amount of intrusion of passenger leg space.
• NOTE: Placement of mount: Passenger side floor, in front of seat. Angled step moves pole away from passenger leg space. Does not interfere with levers or factory-installed console or 4WD lever.

Included RAM-234-3 Tough Tray pictures shown above with dimensions.


Optional

and VESA plates, and Tough Tray II for medium sized electronic devices.